DI-206 ISDN Remote Router
This is the same Software Update configuration information contained in the
Software Update section in the "PROM System Configuration" chapter. The
parameters are described in that section.
Perform a System Restart after configuring these settings begins the software update
procedure.
System Restart
The system restart function enables you to reset the DI-206 without powering off.
Some setting changes require a system restart in order for them to take effect.
A system restart will not affect the router's settings, but will clear all tables
including the routing table and all SNMP counters and tables. It is also used to
initiate a software update.
81