Table of Contents
Advertisement
DI-206 ISDN Remote Router
To log on to the router, use the factory set username and password "Admin"
(without the quotes). Please note that the user name and password are case-sensitive.
Upon entering the username and password (using the <tab> key to jump to the next
field), position the cursor on OK and press <Enter>. You will then see the following
Main Menu:
Step 7 - Configuring the LAN Port
Preparing the router for connection to a LAN only requires enabling the LAN port,
enabling IP networking, assigning the LAN port an IP address and enabling Telnet
(if necessary). After the LAN port is configured, all other features on the router can
be configured remotely through the LAN by using the included Windows-based
Router Configuration Utility or Telnet. Regardless, the router can always be
configured using a console connected to the RS-232 Console port.
To configure the LAN:
13
Advertisement
Table of Contents
