Switching On The Cooktop; Setting The Power Level; Changing The Power Level; Switching Off A Cooking Zone/The Cooktop - Miele KMDA 7476 FR Operating And Installation Instructions


Risk of fire due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating-up time
on induction cooktops is much
shorter than on conventional
cooktops.

Switching on the cooktop

 Touch the  sensor.
Further sensor controls will light up.
If no further entry is made, the
cooktop will switch itself off after a
few seconds for safety reasons.

Setting the power level

Permanent pan recognition is activated
as standard (see "Programming").
When the cooktop is switched on and
you place an item of cookware on one
of the cooking zones, all the sensors
for the numerical display will light up.
 Place a pan on the cooking zone you
want to use.
 Touch the appropriate power level
sensor on the numerical display.

Changing the power level

 Touch the relevant cooking zone
display.
The cooking zone display appears
brighter.
 Touch the appropriate power level
sensor on the numerical display.
Switching off a cooking zone/
the cooktop
Switching off a cooking zone
 Touch and hold the relevant cooking
zone display until the cooking zone
switches off.
or
 Touch the relevant cooking zone
display.
The cooking zone display appears
brighter.
 Touch the 0 sensor on the numerical
display.
Switching the cooktop off
 To switch off the cooktop and all the
cooking zones, touch the  sensor.
Operation
35