Operation; Operating Principles - Miele KMDA 7476 FR Operating And Installation Instructions

Operation

Operating principles

This ceramic cooktop is equipped with
electronic sensors which react to finger
contact. For safety reasons, when
switching the appliance on, the On/
Off  sensor needs to be touched for a
little longer than the other sensors.
Each time you touch a sensor, an
acoustic signal sounds.
Only the printed On/Off  symbol is
visible when the cooktop is switched
off. More sensors light up when the
cooktop is switched on.
In order to set or alter a power level, the
cooking zones must be "active". To
activate a cooking zone, touch the
display of the relevant cooking zone. The
relevant cooking zone display will
appear brighter when touched. While
the display is brighter, the cooking zone
is "active" and you can set a power level
or time.
Exception: If only one of the cooking
zones is in operation, you can alter the
power level without activating the
cooking zone.
34

Malfunction due to dirty and/or
covered sensors.
If the sensors are dirty or covered,
this could cause them to fail to react,
to activate a function inadvertently or
even to switch the appliance off
automatically (see "Safety features –
Safety switch-off"). Placing hot pans
on the sensor controls/indicators can
damage the electronic unit
underneath.
Keep the sensors and indicators
clean.
Do not place anything over the
sensors or indicators.
Do not place hot pans over the
sensors or indicators.