Cleaning The Extractor Drip Tray - Miele KMDA 7476 FR Operating And Installation Instructions

Cleaning and care
Cleaning the grease filter and cover
grille by hand
 Clean the cover grille and the grease
filter with a soft nylon brush in a mild
solution of hot water and a little
washing-up liquid. Do not use
concentrated washing-up liquid.
Cleaning the grease filter and cover
grille in the dishwasher
 Place the cover grille upright in the
lower basket.
 Place the grease filter with its base
facing upwards in the lower basket.
Ensure the spray arm is not
obstructed.
 Use a standard household dishwasher
detergent.
 Select a dishwasher programme with
a maximum wash temperature of:
- 55 °C for the cover grille
- 65 °C for the grease filter
Depending on the detergent used,
cleaning the grease filter in a
dishwasher can cause permanent
discolouration to the internal surfaces
of the filter. This will not affect the
functioning of the grease filter in any
way.
58

Cleaning the extractor drip tray

Clean the drip tray if spillage or boiling
over has resulted in liquids getting into
the extractor.
 Remove and clean the grease filter as
described in "Cleaning and care –
Grease filter/Cover grille".
 Hold the drip tray securely and open
the 4 catches (2 on the right and 2 on
the left). Carefully remove the tray
from the casing, making sure it is kept
horizontal.
 Pour out the liquid.
 Clean and dry the drip tray.
 Also clean and dry accessible areas
inside the extractor.
 Fasten the drip tray back onto the
casing.
 Refit the grease filter and the cover
grille.
Internal surfaces of the
extractor
 When removing the grease filter for
cleaning, also clean off any accessible
oil or fat build-up from the casing.
Doing so will prevent a fire hazard.