Miele KMDA 7476 FR Operating And Installation Instructions page 63

Problem
Liquid has entered the
extractor.
Extraction performance
has decreased.
Extraction noise has
increased.
The  sensor is lit up.
The  sensor is lit up.
The  sensor no longer
lights up.
Possible cause and remedy
Due to boiling over or spillage, liquid has made its way
through the cover grille into the extractor.
The base of the grease filter can hold approx. 250 ml
of liquid. The drip tray underneath the housing can
hold a further 250 ml of liquid.
 Switch the extractor off.
 Clean the grease filter, the drip tray and the inside of
the housing (see "Cleaning and care").
Objects (e.g. a cloth) have been drawn into the
extractor.
 Switch the extractor off.
 Remove the grease filter (see "Cleaning and care –
Cleaning the grease filter").
 Remove any objects from the grease filter.
The charcoal filter needs to be reactivated.
 If the extractor is being operated in Recirculation
mode, reactivate the charcoal filter as described in
the operating and installation instructions supplied
with the recirculation box. Reset the operating hours
counter (see "Cleaning and care – Resetting the
charcoal filter operating hours counter" in these
operating and installation instructions).
 If the extractor is being operated in Extraction
mode, reset the operating hours counter (see
"Cleaning and care" – Resetting the charcoal filter
operating hours counter" in these operating and
installation instructions).
The grease filter must be cleaned.
 Clean the grease filter as described in "Cleaning and
care – Grease filter/Cover grille".
The Con@ctivity function of the integrated extractor is
permanently deactivated.
 Activate the Con@ctivity function of the integrated
extractor in programming (see "Programming").
Problem solving guide
63