Download Print this page
Genexis FiberTwist F2115 Installation Manual

Genexis FiberTwist F2115 Installation Manual

Advertisement

Quick Links

F2115
FiberTwist–Series
Installation Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the FiberTwist F2115 and is the answer not in the manual?

Questions and answers

Summary of Contents for Genexis FiberTwist F2115

  • Page 1 F2115 FiberTwist–Series Installation Guide...
  • Page 2: Button Overview

    Button overview Port overview LC/APC coupler Unlock button Remove FiberTwist or Blind Cover – press and hold while twisting counterclockwise...
  • Page 3 • Rotate the Blind Cover counterclockwise till it blocks. Box contents Important: These instructions • Remove the Blind Cover from the baseplate (FTU) by pulling • Genexis FiberTwist-F2115 need to be followed precisely and it towards yourself. uninterrupted. This minimizes •...
  • Page 4 Remove dust cap Twist! • Take the FiberTwist out of the box. • Place the FiberTwist on the FTU as shown in the picture below, • The dust cap is connected to the red string in a 30–degree angle. located on the rear of the FiberTwist. •...
  • Page 5 Revision 1.0 March 2020, Copyright © 2020 Genexis B. V . All rights reserved. Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or otherwise revise this publication without notice.