Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genexis FiberTwist G2110
Summary of Contents for Genexis FiberTwist G2110
- Page 1 G2110 FiberTwist–Series Installation Guide...
- Page 2 Button overview Port overview LAN port Power port Reset ON/OFF Unlock button button button Remove FiberTwist or Blind Cover – press and hold while twisting counterclockwise LED dim button Dim LEDs – press and release to dim LEDs in steps Reset button (recessed) ON/OFF button Reset...
- Page 3 LED overview System Green – system ok Green (blinking) – booting – power off Uplink Green – link ok Green (blinking) – link establishing – no link Optical signal – no optical signal – optical signal ok Green – LAN port connected, no traffic Green (blinking) –...
- Page 4 2. Rotate the Blind Cover counterclockwise till it blocks. Box contents Important: Instructions need 3. Remove the Blind Cover from the baseplate (FTU) by pulling • Genexis FiberTwist (active device) to be followed precisely and it towards yourself. • Power adapter uninterrupted.
- Page 5 Remove dust cap Twist! 1. Take the FiberTwist out of the box. 1. Place the FiberTwist on the FTU as shown in the picture below, 2. The dust cap is connected to the red string in a 30–degree angle. located on the rear of the FiberTwist. 2.
- Page 6 1. If required, connect your personal devices to the LAN ports via an RJ45 network cable. Hereby, Genexis B. V . declares that the product FiberTwist-G2110 is in compliance 2. Connect the supplied power adapter to the FiberTwist and plug the adapter with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, Delegated Directive into a power socket.
- Page 7 Revision 1.4 - June 2021 - Copyright © 2021 Genexis Netherlands B. V . All rights reserved. Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the FiberTwist G2110 and is the answer not in the manual?
Questions and answers