Astralpool Viron Connect 10 Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Astralpool Manuals
  4. Controller
  5. Viron Connect 10
  6. Installation and operation manual
Astralpool Viron Connect 10 Installation And Operation Manual

Astralpool Viron Connect 10 Installation And Operation Manual

Pool and spa controller
Hide thumbs Also See for Viron Connect 10:
Table of Contents

Advertisement

Quick Links

Download this manual
Viron Connect 10 Pool and Spa Controller
FOR YOUR SAFETY - This product must be installed in accordance with the latest edition of AS/NZS 3000 and any other local applicable regulations. Before installing this product,
read and follow all warning notices and instructions that accompany this product. Failure to follow warning notices and instructions may result in property damage, personal injury,
or death. Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can cause serious injury, property damage, or death.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. This information should be
given to the owner/operator of this equipment.
CONNECT 10 RF
REMOTE CONTROL TRANSCEIVER
CONNECT 10 RF
www.connectmypool.com
Service and Support: 1300 717 116
Product No: 10019
TOUCHSCREEN TRANSCEIVER
www.connectmypool.com
CONNECT 10 RF
Service and Support: 1300 717 116
Product No: 10016
EQUIPMENT TRANSCEIVER
CONNECT MY POOL
www.connectmypool.com
Service and Support: 1300 717 116
INTERNET GATEWAY
Product No: 10017
www.connectmypool.com
Service and Support: 1300 717 116
Product No: 10030
WARNING
Installation and Operation Manual
Viron Connect 10
Pool & Spa
Home
Favorites
Lighting
more...
Heating
Chemistry
Timers

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Viron Connect 10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Astralpool Viron Connect 10

Summary of Contents for Astralpool Viron Connect 10

  • Page 1 Heating Chemistry Timers Viron Connect 10 Pool and Spa Controller WARNING  FOR YOUR SAFETY - This product must be installed in accordance with the latest edition of AS/NZS 3000 and any other local applicable regulations. Before installing this product, read and follow all warning notices and instructions that accompany this product.
  • Page 2 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Record your equipment details here for quick reference: WARRANTY Model No. : REGISTRATION Serial No. : AUSTRALIA WARRANTY: For full warranty terms and conditions and to register your warranty, visit www.astralpool.com.au/warranty and complete your details.

  • Page 3: Table Of Contents

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Table of Contents Section 1. Important Safety Instructions ..4 Section 7. Operations ........19 7.1 Programming ..........19 Section 2. System Overview ......5 7.2 Programming an RF Remote ......23 2.1 Contents ............

  • Page 4: Section 1. Important Safety Instructions

    All equipment to be operated from the Viron controller should be connected prior to establishing power to the control box. This includes both power cables and RJ12 data cables. All RJ12 data cables used in AstralPool communication systems are a straight through configuration. The use of cross over cables may cause damage to your system and void warranty.

  • Page 5: Section 2. System Overview

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 2. System Overview Dimensions 2.4.1 Electrical Box Contents 140mm 480mm Before starting, check that you have the correct parts as indicated in Table 1. If any parts are...

  • Page 6: Section 3. System Installation

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 3. System Installation CHLORINATOR POOL/SPA FILTER PUMP 3 WAY VALVE CONNECT 10 TOUCHSCREEN Home Favorites Pool & Spa Lighting more... Heating Chemistry Timers HEATER CHECK SPA RETURN...

  • Page 7: Install Touchscreen In Electrical Box

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Install Wall Mounted Touchscreen NOTE: The Touchscreen is supplied as a complete unit with a mounting base for solid walls, mounting arms for plasterboard/drywall hollow walls and hardware.

  • Page 8: Electrical Connections

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Verify the “TOP” marking is on top. Secure Clamp distance is slightly the screen backing panel / surface wall mount larger than wall distance base assembly onto the wall with the provided two (2) screws.
  • Page 9 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Secure the touchscreen into the device plate in 3.5.3 Appliance Connections the low voltage compartment. The Viron Connect controller comes with eight (8) 10A GPOs and two (2) 15A GPOs. Two (2) of...

  • Page 10: Section 4. Communication Connections

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 4. Communication Connections Remote Auto Service Time Out Control Channel 1 Channel 2 CONNECT 10 RF 240VAC Channel 3 Live Continuous Voltage REMOTE CONTROL TRANSCEIVER Channel 4 www.connectmypool.com...

  • Page 11: Section 5. Custom Switches

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 5. Custom Switches WARNING FOR YOUR SAFETY: This product must be serviced by a professional pool/spa service technician as described on the front cover of this SYSTEM LOCAL manual.

  • Page 12: Section 6. System Introduction And Setup

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 6. System Introduction and Setup User Interface Overview Pool & Spa Home Favorites Lighting Help Home Setup more... more... Heating Chemistry Timers Figure 11. Controller Main User Interface...
  • Page 13 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Setup - Heater Is a Genus Heater installed? Setup WARNING Number of lighting zones: Potentially high voltages in the power center can create dangerous electrical hazards, possibly causing death, serious injury or property damage.
  • Page 14 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Previous Exit Next Previous Exit Next Channel 1 to Channel 8 Setup - Solar Configure the appliances on each channel of Setup - Solar Select model of Solar Control: the Viron Connect 10 pool and spa controller.
  • Page 15 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual NOTE: If a single speed, 3 speed or variable-speed Setup - Valve 1 pump is connected and programmed as Select this valve’s function: a variable speed pump without the RJ-12...
  • Page 16 View Server Connection Status Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Internet Gateway Menu 10. The final summary screen will show the Configure Wi-Fi Tues 13:10 current setting. Select EXIT to complete the Network: Your Name wizard setup.
  • Page 17 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual 10. Additional users can be added to the user list to allow their use of the Connect My Pool app on their smart phone or tablet. SETTINGS > USER LIST > ADD USERS > enter USER NAME >...
  • Page 18 Factory Setup Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Setup Menu Configure wireless... Tues 13:30 6.2.5 Equipment and Touchscreen Wireless Once the equipment is linked, click SELECT to Transceiver Setup Network ID: 0000 send the new Network ID to the transceivers.

  • Page 19: Section 7. Operations

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 7. Operations Programming Lighting 7.1.1 Pool and Spa Options Enable Lighting Zones... Tues 12:49 Click POOL & SPA on the main menu screen. Pool & Spa Auto –...
  • Page 20 Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Toggle Summer / Winter button. Select task... Tues 12:51 – Summer provides normal operation of Solar. Pool – Winter operates solar pump for 5 minutes Configure Favorites per day to flush collector if AUTO is selected.
  • Page 21 Setup E = Everyday W = Weekend O = Other E = Everyday W = Weekend O = Other Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Timers Timers Menu Menu Timer 1 8:00 - 16:00...
  • Page 22 Configure timers... Tues 12:53 Timer 1: 8:00 - 16:00 E Setup Timer 2: Disabled Setup Enabled Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual < > Timer 3: Disabled Setup Choose Days Done Timer 4: Disabled Setup To install and operate an external heater;...

  • Page 23: Programming An Rf Remote

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual 7.1.8 Standard Solar Control via Auxiliary Valve Lighting control; – Use the remote to toggle an installed Delta During the Wizard Setup, click CONNECT lighting system between On, Off, or cycle INBUILT.See Section 6.2.1 step 3.

  • Page 24: Section 8. Service

    Section 6.2.1 step 7 discussed if the system is configured with cleaning. Section 9. General Maintenance If the supply cord is damaged, it must be replaced by AstralPool, its service agent or a similarly qualified person in order to avoid a hazard. Maintenance Schedule A small amount of regular care and attention to your pool equipment will help ensure long life and trouble free performance.

  • Page 25: Section 10. Troubleshooting

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Section 10. Troubleshooting 10.1 Viron Connect 10 Troubleshooting Symptom Solution Equipment not activating on time • Check All Auto selected from Home menu clock • Check timer programming •...

  • Page 26: Wireless Troubleshooting Touchscreen Process

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Symptom Solution IP Address = 0000 • The most common cause is that the Internet Gateway is right on the fringe of wireless range. Try moving the Internet Gateway closer to the pool owner’s wireless router, then cycle power to the Internet Gateway...

  • Page 27: Connect My Pool Server Status

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual 10.5 Connect My Pool Server Status Code Text Meaning Idle The IG has not yet attempted to connect to the server. Wait for the IG to automatically connect, or click RECONNECT’...

  • Page 28: Internet Gateway Status Lights

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual 10.6 Internet Gateway Status Lights NOTE: This indicator is only giving the status of the local connection to the wireless network. The status for the connection to the ConnectMyPool servers is still given by the CONNECTED indicator.

  • Page 29: Factory Reset

    Viron Connect 10 Pool and Spa Controller | Installation and Operation Manual Option Sw 1 Pool/Spa Inlet Valve Outlet Valve Selection OFF (“standard”) Pool OFF/Forward OFF/Forward OFF (“standard”) ON/Reverse ON/Reverse ON (“fill and drain”) Pool OFF/Forward ON/Reverse ON (“fill and drain”)
  • Page 30 Rosedale Auckland 0632, New Zealand NZBN: 942 903 181 70759 AstralPool.co.nz | 0800 807 665 A Fluidra Brand ©2023 ASTRALPOOL is a registered trademark of FLUIDRA COMMERCIAL, S.A.U., used under license. This document is subject to change without notice. H0714100_REVA...

Table of Contents