Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Antra Digital-Pro DP3+
Summary of Contents for Antra Digital-Pro DP3+
- Page 1 Customer Servic Parts & Accessories WWW.AntecTrade.com WWW.facebook.com/AntraHelmets Digital-Pro SERIES Toll-Free:1-888-450-6788 North America Outside of USA & Canada: +1-905-415-3487 DP3+ E-mail:info@antectrade.com Auto-Darkening Welding Helmet User Manual Made in china 2023...
-
Page 2: Important Safety Instructions
Digital-Pro SERIES ARC RAYS can burn eyes ! DP3+ Never look at arc welding without proper eye protection. Arc rays from the Auto-Darkening Welding Helmet 2023 welding process produce intense visible and invisible (ultraviolet and infrared) rays that can burn eyes and skin. -
Page 3: Technical Specifications
TECHNICAL SPECIFICATIONS FLYING METAL can injure eyes ! Model DP3+ • Welding, chipping, wire brushing, and grinding causes sparks and flying metal. As welds ADF Model DP3+ cool, they can throw off slag. Viewing Area 98mm x 53mm/3.86" x 2.09" •... -
Page 4: Operation
1.OPERATION ADJUST THE WELDING HELMET ACCORDING TO YOUR INDIVIDUAL REQUIREMENTS. When stored in extremely cold temperature, the helmet should be warmed up to • ambient temperature before welding. The headgear should be adjusted both in circumference and height. Inspect all parts for signs of wear or damage. Any scratched or cracked parts should be •... -
Page 5: Mode Selection
The values can be changed. Sens. Delay DP3+ 0.1s 0.9s Sens. Delay Sens. Delay Sens. Delay 0.1s 0.9s 0.1s 0.9s 0.1s 0.9s Weld Mode Cut Mode SCAN TO WATCH VIDEO Fig.4a Blinking Fig.4b (Fig.4) 2.MODE SELECTION SHADE TACK MODE 2 SETP1 2 STEP2 Press button（Fig.4), the lens is switched between welding, cutting，tack mode and... -
Page 6: Setting Selection
4. LOCK-SHADE MODE The shade is locked to a certain shade, and the lens is activated and darkened for maximum 1 hour. Shade can be locked and adjusted from 5-13(Fig.4c). Sens. Delay Sens. Delay The lens exits shade lock mode if： DP3+ DP3+ 0.1s... -
Page 7: Battery Display
CUT MODE Grinding mode will not respond to any welding arc, and ALWAYS The lens has six different settings，3-8：conventional setting（Fig.8） change the shade setting back to 5-8/9-14 after grinding. Video - Battery Repacement Press button to enter shade lock mode， The lens will be activated and darkening as 6.BATTERY DISPLAY per the shade and delay settings. - Page 8 Remove the front filter by pulling out the retaining frame by move the lock switch from the helmet. (Fig.10) Sens. Delay Sens. Delay 0.1s 0.9s 0.1s 0.9s VVideo - Lens Cover Plate Repacementt (Fig.12.b) (Fig.12.a) (Fig.10) REPLACEMENT OF AUTO-DARKENING WELDING LENS Ensure the exterior lens cover plate is mounted before using and the protective film on the lens cover plate is removed.
-
Page 9: Warranty
8.INSPECTION 1. Carefully inspect your Auto-Darkening Welding lens regularly. If the described malfunctions cannot be solved, stop using the helmet immediately and contact 2. Cracked, pitted or scratched lens glass or lens cover plate plate reduced vision will seriously the nearest distributor. impair protection.
Need help?
Do you have a question about the Digital-Pro DP3+ and is the answer not in the manual?
Questions and answers