Subscribe to Our Youtube Channel
Related Manuals for Antra AntFi X60 Series
Summary of Contents for Antra AntFi X60 Series
- Page 1 Customer Sevice Technical Info. Parts & Accessories AntFi X60 Series Promotions www.facebook.com /AntraHelmets Auto-Darkening Welding Helmet User Manual Made in china...
-
Page 2: Important Safety Instructions
Antra X60 Series ARC RAYS can burn eyes ! Never look at arc welding without proper eye protection. Arc rays from the Auto-Darkening Welding Helmet welding process produce intense visible and invisible (ultraviolet and infrared) User Manual（2017） rays that can burn eyes and Skin, Hot sparks fly off from the weld and can burn eyes and skin. -
Page 3: Technical Specifications
Standards Compliance ANSI Z87.1-2010 & CSA Z94.3-2007 & CE EN379:2009-07 GENERAL INFORMATION Antra X60 Series Auto-Darkening Welding Helmet does not protect against severe impact hazards, MARKING EXPLAINED such as fractured grinding wheels or abrasive discs，explosive devices or corrosive liquids． Model Standards Machine guards or eye splash protection must be used when these hazards are present．... -
Page 4: Parts List
Adjustable Headband AH7-860-XXXX Lens Retaining Frame When stored in extremely cold temperature, the helmet should be warmed up to • ambient temperature before welding. Inspect all parts for signs of wear or damage. Any scratched or cracked parts should be •... -
Page 5: Recommended Settings
RECOMMENDED SETTINGS ON/OFF The solar unit automatically switches ON when exposed to light. 2. SELECT THE SHADE NUMBER Shade 8 Shade 9 Shade 10 Shade 11 Shade 12 Shade 13 Shade 14 Shade 11 Shade 12 Shade 13 Shade 14 Shade 15 Shade 5 Shade 11... -
Page 6: Maintenance
Always change both of the batteries when renewing them. 4. PRE-WELDING CHECK & BATTERY TESTING AntFi-X60-8 The following procedures should be followed to NEVER put used batteries into house hold waste because they are very toxic to the environment. perform this testing: Please always have used batteries recycled properly, and stay GREEN when welding. - Page 7 MAINTENANCE : AH7-860-XXXX REPLACEMENT OF EXTERIOR COVER LENS Pull up the two lock lug on the bottom of the (Fig.17) filter (Fig.17), the filter cartridge will pop loose (Fig.15) (Fig.16) from the shield. Detach the cartridge from the shield and put it aside.
-
Page 8: Warranty
- Battery terminals and the contact surface of the filter are dirty or oxidized(clean both) . REPLACEMENT OF INNER COVER LENS - Shade adjustment knob is on "GRIND" position, set helmet on “WELD” and/or proper shade from “5-13”. Detach the auto darkening filter from the helmet THE LENS STAYS DARK AFTER THE WELD ARC IS EXTINGUISHED, OR THE AUTO-LENS STAYS DARK WHEN NO ARC IS PRESENT.
Need help?
Do you have a question about the AntFi X60 Series and is the answer not in the manual?
Questions and answers