Flycam FLCM-FLN-MSTR-PLA-01 Assembly Manual

Flowline master for camera & gimbals with placid stabilizing arm

Hide thumbs Also See for FLCM-FLN-MSTR-PLA-01:

Download this manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Tensioner Spring

Support Bar

Release

Lever

Balance Adjustment

Knob

Accessory Bag

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

Flowline Master for Camera & Gimbals with Placid

Stabilizing Arm

A s s e m b l y M a n u a l

statutes or in writing by the Publisher.

(FLCM-FLN-MSTR-PLA-01)

Camera Hook

Safety Shock Cord

Side Support

Adjustment

Bag Packing

Need help?

Do you have a question about the FLCM-FLN-MSTR-PLA-01 and is the answer not in the manual?

Page 1 Flowline Master for Camera & Gimbals with Placid Stabilizing Arm (FLCM-FLN-MSTR-PLA-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Flowline Master with Placid Setup NOTE: It is recommended to attach the minimum required weight (4kg / 9lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.  Remove placid from foam packing. The placid arm has a cord attached to it.
Page 3 For Safety Belt  Attach one end of the safety belt with the support jacket and make a knot with the rest of the belt, as shown in the image. You can attach this belt in many areas according to your requirement. ...
Page 4  Using an allen key, pull the mounting bracket of the placid arm out of the flowline support arm and remove the cord from the bracket. Make sure it comes out precisely through the hole in the placid arm. Cord Assembly into Flowline Master ...
Page 5 YOUR FLYCAM FLOWLINE MASTER FOR CAMERA & GIMBALS WITH PLACID ALL DRESSED UP AND READY TO GO (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.