Flycam FLCM-FLN-CH Assembly Manual

Quick release camera hook for flycam flowline body support rigs

Download this manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

Quick Release Camera Hook for Flycam Flowline

Body Support Rigs

A s s e m b l y M a n u a l

Flycam Quick Release Camera Hook

with 4 x Ball Studs (1/4"-20) & (3/8"-16)

statutes or in writing by the Publisher.

(FLCM-FLN-CH)

Page 1 Quick Release Camera Hook for Flycam Flowline Body Support Rigs (FLCM-FLN-CH) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Setup Camera Hook • Loosen the screw of the Camera Hook attached to the Flowline Support Arm (Not Included) using an Allen key. • Similarly, remove the second screw. • Now, remove the Hook from the Flowline Support Arm. • As shown in the image, take the Cord bundle out from the Cup and pull the Cord until a Cord lock comes out.
Page 3 Camera hook to the Ball Stud. NOTE: Solid and secure attachment via thumbscrew. NOTE: It has a thumbscrew that ensures a solid connection for your Rig. • The standard Camera hook by Flycam is universal and can be used on any Camera.
Page 4 YOUR PROAIM QUICK RELEASE CAMERA HOOK FOR FLYCAM FLOWLINE BODY SUPPORT RIGS ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.