Flycam FLCM-FLN-PLA Assembly Manual

Flowline placid 2-axis stabilizing arm

Hide thumbs Also See for FLCM-FLN-PLA:

Download this manual

Flowline Placid 2-Axis Stabilizing Arm

(FLCM-FLN-PLA)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Safety Shock Cord

Tensioner Spring

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Page 1 Flowline Placid 2-Axis Stabilizing Arm (FLCM-FLN-PLA) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Flowline Placid Setup  Remove the hook from Flowline support bar.  Take the cord bundle out from the cup and pull the whole cord until a cord lock comes out.  Separate the cord from cord lock and keep the lock aside for attaching it back afterwards.
Page 3  Pull out the front pulley carefully, so it doesn’t drop into the Flowline support bar and Insert the cord from the bottom hole and take it out from the top hole.  Mount front pulley in between the cord, and pull the cord so that it goes back inside the support arm.
Page 4  Loosen the knob of hook and attach camera to it. Tighten with provided knob to ensure slip-free connection. Install Flycam Flowline Placid and change the Spring, Follow this https://bit.ly/3Ae0t7a...
Page 5 YOUR FLOWLINE PLACID 2-AXIS STABILIZING ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.