Flowline starter for camera & gimbals w placid stabilizing arm (17 pages)
Summary of Contents for Flycam FLCM-FLN-MSTR-PLA
Page 1
Flowline Master for Camera & Gimbals with Placid Stabilizing Arm (FLCM-FLN-MSTR-PLA) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2
Flowline Master with Placid Setup Remove placid from foam packing. The placid arm has a cord attached to it. Join section 1 of the support bar to section 2 with a simple push-fit technique, as shown in the image. ...
Page 3
For Safety Belt Attach one end of the safety belt with the support jacket and make a knot with the rest of the belt, as shown in the image. You can attach this belt in many areas according to your requirement. ...
Page 4
Using an allen key, pull the mounting bracket of the placid arm out of the flowline support arm and remove the cord from the bracket. Make sure it comes out precisely through the hole in the placid arm. Cord Assembly into Flowline Master ...
Page 5
YOUR FLYCAM FLOWLINE MASTER FOR CAMERA & GIMBALS WITH PLACID ALL DRESSED UP AND READY TO GO (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.