Flycam Flowline Assembly Manual

With stabilizing arm

Download this manual

Flowline with Stabilizing Arm

(FLCM-FLN-PA)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Flowline Placid

Storage Bag

Body Suppport

Tensioner Spring

Safety Shock Cord

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Page 1 Flowline with Stabilizing Arm (FLCM-FLN-PA) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Flowline Vest Setup  Join support bar with section of support jacket by push-fit technique. Similarly, join front section with support bar as shown.  Wear support jacket and tighten the buckles provided at waist and chest and adjust as per your convenience.
Page 3 Allen Key.  Now pass the rope through Placid adapter as shown in the image. Mount Placid on Flowline arm and tighten the Allen bolt with help of Allen key.  Align the rope with the pulley of Placid Arm.
Page 4 Attach the spring to Hook and tighten the knob to secure it properly.  Secure the Placid on Flowline Arm with provided tie to ensure slip-free connection.  Now mount your camera setup on hook of Flowline and tighten the knob to secure it properly.
Page 5 YOUR FLYCAM FLOWLINE WITH STABILIZING ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.

Flcm-fln-pa