Start Cleaning - Dreame X40 Master User Manual

How to Use
EN
Vacuum and Mop
Note:
·
When using the mop assembly for the first time, the robot performs the "Vacuum
and Mop" task by default.
· During use, the base station will supply clean water and drain used water
automatically.

1. Start cleaning

Press the button on the base station, or the button
or use the app to make the robot start from the base station. Then the
robot will plan the optimal cleaning route and perform the cleaning
task based on the created map.
Note:
·
The mop pads will be cleaned before the robot starts mopping, please wait
patiently.
·
To ensure the robot easily returns to the base station after cleaning, it is
recommended to make the robot start from the base station. Do not move the
base station or the washboard during operation.
· Hot water cleaning can be enabled in the app for mop pad washing tasks, which
applies to all modes. To prevent scalding, do not touch the water outlet when the
function is on.
25
2. Auto mop washing
When cleaning, the robot will automatically return to the base station to
wash mop pads based on the mop pad cleaning frequency specified in
the app. The base station will automatically refill the robot's water tank
and the robot will resume cleanup.
on the robot,
3. Automatically empty the dust box and wash and dry
the mop pads
After the robot finishes a cleaning task and returns to the base station to
charge, the base station will automatically start emptying the dust box.
Then it will wash and dry the mop pads.
Note:
·
If the auto-empty function is turned off in the app, the base station will not
automatically empty the dust box.
·
The base station will empty the dust box according to the setting in the app.