Download Print this page
Dreame X50 Ultra Manual
Hide thumbs Also See for X50 Ultra:

Advertisement

Available languages

Available languages

Quick Links

Safety Information
EN
·
Do not use the robot in an area suspended above ground level without a
Usage Restrictions
protective barrier.
·
Do not place the robot upside down. Do not use the LDS cover, robot cover, or
bumper as a handle for the robot.
·
Use the robot in environments with an ambient temperature above 0°C and
below 40°C. Make sure there is no liquid or sticky substance on the floor.
·
To prevent damage or harm from dragging, clear any loose objects from the
floor, and remove cables or power cords on the cleaning path before operating
the appliance.
·
Remove fragile or small items from the floor to prevent the robot from bumping
into and damaging them.
·
Keep hair, fingers, and other body parts away from the suction opening of the
robot.
·
Keep the cleaning tool out of reach of children.
·
Do not operate the appliance in a room where an infant or child is sleeping.
·
Do not place children, pets, or any item on top of the robot regardless of
whether it is stationary or moving.
·
Only clean water and the officially-approved cleaning solution can be added
to the clean water tank. Do not add any other liquid such as alcohol or
disinfectant. The ratio of the cleaning solution to clean water can be checked
on the cleaning solution bottle. Keep the cleaning solution out of reach of
children.
2
Safety Information
·
Do not use the robot to clean any burning objects. Do not use the robot to pick
Usage Restrictions
up flammable or combustible liquids, corrosive gases, or undiluted acids or
solvents.
·
Do not vacuum hard or sharp objects. Do not use the appliance to pick up
objects such as stones, large pieces of paper or any item that may clog the
appliance.
·
Plug must be removed from the socket-outlet before cleaning or maintaining
the appliance.
·
Do not wipe the robot or the base station with a wet cloth or rinse them with
any liquid. After cleaning washable parts, fully dry the parts before reinstalling
and using them.
·
Please use this product in accordance with the instructions in the User Manual.
Users are responsible for any loss or damage that arise from improper use of
this product.
·
Do not use any third-party battery or base station. The robot can only be used
Batteries and
with the model RCXE0105/RCXE0108/RCXE0109 base station.
Charging
·
Do not attempt to disassemble, repair, or modify the battery or the base station
on your own.
·
Do not place the base station near a heat source.
·
Do not use a wet cloth or wet hands to wipe or clean the base station's
charging contacts.
EN
3

Advertisement

loading
Need help?

Need help?

Do you have a question about the X50 Ultra and is the answer not in the manual?

Questions and answers

Summary of Contents for Dreame X50 Ultra

  • Page 1 Safety Information Safety Information · · Do not use the robot in an area suspended above ground level without a Do not use the robot to clean any burning objects. Do not use the robot to pick Usage Restrictions Usage Restrictions up flammable or combustible liquids, corrosive gases, or undiluted acids or protective barrier.
  • Page 2: Safety Information

    Mop Pad × 2 Mop Pad Washboard Filter Cleaning Solution Cleaning Tool Hereby, Dreame Trading (Tianjin) Co., Ltd. declares that the radio equipment type RLX85CE/RLX85CE-1/RLX85CE-3/RLX85CE-4/RLX85CE-5/ Base Station (pre-installed) Holder × 2 (pre-installed) RLX85CE-6 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.dreametech.com...
  • Page 3 Product Overview Product Overview Robot Dock Button Package Contents · (Dreame X50 Ultra Complete) Press to send the robot back to the base station Other Accessories · Press and hold for 3 seconds to disable Child Lock Power / Clean Button ·...
  • Page 4 Product Overview Product Overview Robot and Sensors Robot and Sensors Cliff Sensors Omnidirectional Wheel Carpet Sensor LED Auxiliary Light Reset Button/Wi-Fi Indicator · Side Brush Extension Assembly Press and hold for 3 seconds to restore to Brush Guard Main Brushes AI IR Camera factory settings Clearance Leg...
  • Page 5 Product Overview Product Overview Base Station Used Water Tank Base Station Water Tank Clip Status Indicator · Cover Reserved Slot for Connecting the Solid White: The base station Float Ball Water Hookup Kit for Auto Refilling is connected to power ·...
  • Page 6: Before Use

    Preparing Your Home Before Use 1. Place the Base Station and Connect to an Electrical Outlet 2. Install the Ramp Extension Plate Place the base station in a location that is as open as possible with a good Wi-Fi signal. Leave enough space as shown in the figure and remove any objects in the shaded area.
  • Page 7 Before Use Before Use 3. Remove Robot Protections and Install the Mop Assembly 4. Connect the Robot to the Base Station 5. Add the Cleaning Solution 6. Add Water to the Clean Water Tank Take out the clean water tank from the base station and fill up the Press and hold the button on the robot for 3 seconds to turn it on.
  • Page 8: How To Use

    Connecting with the Dreamehome App How to Use 1. Download the Dreamehome App 2. Add Device Auto Resume Cleaning Turn On/Off Open the Dreamehome app, tap "Scan QR code to connect" , and scan Remove the robot cover and scan the QR code on the robot, or If the battery is too low, the robot will automatically return to the Press and hold the button for 3 seconds to turn on the robot.
  • Page 9 How to Use How to Use 2. Auto mop washing 3. Automatically empty the dust box and wash and dry the Vacuum and Mop Mop after Vacuuming mop pads When cleaning, the robot will automatically return to the base Note: After installing the mop assembly, the robot will operate in "Vacuum Enable the mopping after vacuuming function in the app, and the station to wash mop pads based on the mop pad cleaning After the robot finishes a cleaning task and returns to the base...
  • Page 10: Routine Maintenance

    Routine Maintenance Routine Maintenance Washboard Filter Parts To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine 1. Take out the robot and remove the washboard filter after the mop 3.
  • Page 11 Routine Maintenance Routine Maintenance 2. Rinse the used water tank with clean water, and use the provided Dust Bag Used Water Tank cleaning tool to clean the inner wall of the used water tank. 1. Remove the dust tank cover and discard the dust bag. 3.
  • Page 12 Routine Maintenance Routine Maintenance Main Brushes Side Brush Mop Pad Holders 1. Press the brush guard clips inwards to remove the brush guard, 3. With the screen-printed arrows facing upwards, insert the main Unscrew the side brush with a screwdriver, clean the hair from the Remove and clean the mop pad holders.
  • Page 13 Routine Maintenance Routine Maintenance Dust Box and Filter Robot Sensors Charging Contacts and Signaling Area 1. Remove the robot cover and press the dust box clip to remove the 3. Gently tap the basket of the filter to remove the dirt. Wipe the robot sensors by using a soft and dry cloth, as shown in Clean the charging contacts and the signaling area with a soft and dust box.
  • Page 14: Troubleshooting

    Routine Maintenance Troubleshooting Auto-Empty Vents Mop Pads Problem Solution Clean the auto-empty vents of the robot and the base station with a Remove the mop pads from the mop pad holders to replace them. The battery is low. Recharge the robot on the base and try again. soft and dry cloth.
  • Page 15 Troubleshooting Troubleshooting Problem Solution Problem Solution Check whether there is enough space on both sides or in front of the base station to prevent the robot from being blocked. Make sure that the doors of the rooms to be cleaned are open. The robot gets stuck in The route for returning to charge is blocked, e.g.
  • Page 16: Specifications

    Specifications Battery Disposal and Removal The built-in lithium-ion battery contains substances that are hazardous to the environment. Before disposing of the battery, make sure the Robot Base Station battery is removed by qualified technicians and discarded at an appropriate recycling facility. RLX85CE RLX85CE-1 RLX85CE-3...
  • Page 17 Sicherheitshinweise Sicherheitshinweise · Nutzungsbe- Lesen Sie die Bedienungsanleitung vor der Verwendung des Geräts sorgfältig durch und bewahren Sie sie zum späteren Benutzen Sie den Roboter nicht in einem Bereich, der über dem Boden Nachschlagen auf, um Stromschläge, Brände oder Verletzungen durch unsachgemäßen Gebrauch des Geräts zu vermeiden. schränkungen freisteht, ohne dass eine Schutzbarriere vorhanden ist.
  • Page 18 Sicherheitshinweise Sicherheitshinweise · Nutzungsbe- Akkus und Das richtige Mischungsverhältnis von Reinigungsflüssigkeit und sauberem Verwenden Sie keine Akkus oder eine Basisstation von externen Anbietern. Der schränkungen Wasser steht auf der Flasche mit der Reinigungsflüssigkeit. Bewahren Sie die Aufladen Roboter kann nur mit der Basisstation Modell RCXE0105/RCXE0108/RCXE0109 Reinigungsflüssigkeit außerhalb der Reichweite von Kindern auf.
  • Page 19 Nur für den Innenbereich geeignet Bedienungsanleitung lesen Waschplattenfilter Reinigungsflüs- Wischpad × 2 Wischpad- Reinigungs- Hiermit erklärt Dreame Trading (Tianjin) Co., Ltd. dass das Funkgerät des Typs RLX85CE/RLX85CE-1/RLX85CE-3/RLX85CE-4/RLX85CE-5/ sigkeit werkzeug Basisstation (vorinstalliert) halter × 2 (vorinstalliert) RLX85CE-6 den Anforderungen der Richtlinie 2014/53/EU entspricht. Der vollständige Wortlaut der EU-Konformitätserklärung ist unter der folgenden Internetadresse abrufbar: https://global.dreametech.com...
  • Page 20 Produktübersicht Produktübersicht Packungsinhalt Roboter Dockingtaste · Drücken Sie diese Taste für die Rückkehr des Roboters (Dreame X50 Ultra Complete) Sonstiges Zubehör zur Basisstation · Halten Sie die Taste 3 Sekunden lang gedrückt, um die Kindersicherung zu deaktivieren Einschalt-/Reinigungstaste · Halten Sie die Taste 3 Sekunden lang gedrückt, um das Gerät ein- oder auszuschalten...
  • Page 21 Produktübersicht Produktübersicht Roboter und Sensoren Roboter und Sensoren Klippensensoren Omnidirektionales Rad Teppichsensor LED-Zusatzlicht Reset-Taste/WLAN-Anzeige · Seitenbürsten-Verlängerungseinheit Halten Sie die Taste 3 Sekunden lang gedrückt, Bürstenschutz Hauptbürsten um die Werkseinstellungen KI-IR-Kamera wiederherzustellen Freiraumbein Freiraumbein KI-HD-Kamera Abdeckung Hauptrad Hauptrad Mikrofone Klammern für Bürstenschutz VersaLift-Sensor MopExtend-Baugruppe (Mopp- Randsensor...
  • Page 22 Produktübersicht Produktübersicht Schmutzwasserbehälter Basisstation Basisstation Status-Anzeige · Leuchtet weiß: Die Wasserbehälter-Clip Basisstation ist an die Stromversorgung angeschlossen Abdeckung Reservierter Steckplatz für den · Schwimmerkugel Leuchtet orange: Die Anschluss des Wasseranschlusssets Basisstation hat einen Fehler zum automatischen Nachfüllen · Dauerhaft blau: UV-Licht Schmutzwasserbehälter und Entleeren funktioniert...
  • Page 23: Vor Der Verwendung

    Vorbereitung des Zuhauses Vor der Verwendung 1. Stellen Sie die Basisstation auf und stecken Sie den Stecker 2. Installation der Rampenverlängerungsplatte in die Steckdose Stellen Sie die Basisstation an einem möglichst freistehenden Ort mit gutem WLAN-Signal auf. Lassen Sie genügend Platz, wie in der Abbildung gezeigt, und entfernen Sie alle Objekte im schattierten Bereich.
  • Page 24 Vor der Verwendung Vor der Verwendung 3. Entfernen Sie die Roboterschutzvorrichtungen und 4. Den Roboter mit der Ladestation verbinden 5. Füllen Sie die Reinigungsflüssigkeit ein 6. Wasser in den Frischwasserbehälter einfüllen installieren Sie die Mopp-Baugruppe Nehmen Sie den Frischwasserbehälter aus der Basisstation heraus am Roboter drücken Zum Einschalten des Roboters die Taste (1) Entfernen Sie die Abdeckung des Staubbehälters und ziehen Sie...
  • Page 25 Verbinden mit der Dreamehome App Benutzung 1. Laden Sie die Dreamehome App herunter 2. Gerät hinzufügen Einschalten/Ausschalten Reinigung automatisch fortsetzen Öffnen Sie die Dreamehome-App, tippen Sie auf „Scannen Sie den Entfernen Sie die Abdeckung des Roboters und scannen Sie den 3 Sekunden Wenn der Akku zu schwach ist, kehrt der Roboter automatisch zur Zum Einschalten des Roboters halten Sie die Taste...
  • Page 26 Benutzung Benutzung 2. Automatisches Waschen des Wischmopps 3. Automatisches Entleeren des Staubbehälters und Staubsaugen und Wischen Wischen nach dem Staubsaugen Waschen und Trocknen der Wischmopps Während der Reinigung kehrt der Roboter automatisch zur Hinweis: Nach der Installation der Wischmopp-Baugruppe arbeitet der Aktivieren Sie in der App die Funktion „Wischen nach dem Basisstation zurück, um die Wischmopps zu waschen, je nach der Nachdem der Roboter eine Reinigungsaufgabe erledigt hat und...
  • Page 27: Regelmäßige Wartung

    Regelmäßige Wartung Regelmäßige Wartung Waschplattenfilter Teile Um den Roboter in einem einwandfreien Zustand zu halten, wird empfohlen, in der App oder in der folgenden Tabelle die Hinweise zur 3. Verwenden Sie die App oder drücken Sie die Taste 1. Nehmen Sie den Roboter heraus und entfernen Sie den , um den regelmäßigen Wartung des Zubehörs zu beachten.
  • Page 28 Regelmäßige Wartung Regelmäßige Wartung 2. Spülen Sie den Schmutzwasserbehälter mit sauberem Wasser Staubbeutel Schmutzwasserbehälter aus, und reinigen Sie die Innenwand des Schmutzwasserbehälters 1. Entfernen Sie die Staubbehälterabdeckung und entsorgen Sie 1. Entfernen Sie den Schmutzwasserbehälter, öffnen Sie den Deckel 3. Setzen Sie einen neuen Staubbeutel ein. mit dem mitgelieferten Reinigungswerkzeug.
  • Page 29 Regelmäßige Wartung Regelmäßige Wartung Hauptbürsten Seitenbürste Wischpadhalter 1. Drücken Sie den Bürstenschutz-Clip nach innen, um den 3. Führen Sie den Hauptbürstenhalter mit den aufgedruckten Pfeilen Schrauben Sie die Seitenbürste mit einem Schraubenzieher ab, Entfernen und reinigen Sie die Wischpadhalter. Bürstenschutz zu entfernen und die Bürsten aus dem Roboter zu nach oben schräg nach unten in die Schlitze ein.
  • Page 30 Regelmäßige Wartung Regelmäßige Wartung Staubbehälter und Filter Roboter-Sensoren Ladekontakte und Signalbereich 1. Entfernen Sie die Abdeckung des Roboters und drücken Sie den Wischen Sie die Roboter-Sensoren mit einem weichen und 3. Klopfen Sie leicht auf den Korb des Filters, um den Schmutz zu Reinigen Sie die Ladekontakte und den Signalisierungsbereich mit trockenen Tuch ab, wie in der folgenden Abbildung dargestellt: einem weichen, trockenen Tuch.
  • Page 31 Regelmäßige Wartung Fehleralarm Automatisch entleerte Entlüftungsöffnungen Wischpads Problem Lösung Reinigen Sie die automatisch entleerten Entlüftungsventile des Entfernen Sie die Wischpads aus den Wischpadhaltern, um sie Der Akku ist schwach. Laden Sie den Roboter an der Ladestation auf und versuchen Sie es dann erneut. Der Roboter lässt sich Roboters und der Basisstation mit einem weichen, trockenen Tuch.
  • Page 32 Fehleralarm Fehleralarm Problem Lösung Problem Lösung Überprüfen Sie, ob auf beiden Seiten oder vor der Basisstation genügend Platz vorhanden ist, um zu verhindern, dass der Roboter blockiert wird. Der Roboter kann die zu Stellen Sie sicher, dass die Türen der zu reinigenden Räume offen sind. Der Roboter bleibt vor Der Weg zur Rückkehr zum Laden ist blockiert, z. B.
Save PDF