The word "dreame" is the abbreviation of Dreame Technology Co., Ltd. and its subsidiaries in China. It is the transliteration of the company's Chinese name " 追觅" ,
which means striving for excellence in every endeavor and reflects the company's vision of continuous pursuit, exploration and search in technology.
For more support, contact us via https://global.dreametech.com
Page 1
Robot Vacuum and Mop with Auto-Empty and Mop Self-Cleaning User Manual For more support, contact us via https://global.dreametech.com Manufactured by: Dreame Trading (Tianjin) Co., Ltd. The illustrations in this manual are for reference only. Please refer to the actual product. Made in China AU-A00...
Contents Safety Information To avoid electric shock, fire or injury caused by improper use of the appliance, please read the user manual carefully before using the Safety Information appliance and keep it for future reference. Product Overview Usage Restrictions This product should not be used by children younger than 8 years old nor ·...
Safety Information Safety Information Usage Restrictions Usage Restrictions Do not use the robot in an area suspended above ground level without a Do not use the robot to clean any burning objects. Do not use the robot to pick · ·...
(1 pre-installed) Base Station Hereby, Dreame Trading (Tianjin) Co., Ltd. declares that the radio equipment type RLX63CE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.dreametech.com...
Page 5
Product Overview Product Overview Robot Robot and Sensors Cliff Sensors Spot Cleaning Button LED Auxiliary Light · Press to start spot cleaning Carpet Sensor Omnidirectional Wheel Side Brush Extension Assembly Camera Indicator (The camera indicator will light up when the Brush Guard Main Brush Power / Clean Button...
Product Overview Preparing Your Home Status Indicator Base Station · Solid White: The base station is connected to power Upper Cover · Solid Orange: The base station has an error Used Water Tank Clean Water Tank Dust Bag Slot Auto-Detergent Compartment Filter Signaling Area Before cleaning, please move away unstable, fragile, valuable or dangerous...
Before Use Before Use 1. Place the Base Station and Connect to an Electrical Outlet 2. Install the Ramp Extension Plate 4. Connect the Robot to the Base Station automatically while working. Place the base station in a location that is as open as possible with a good Press and hold the button on the robot for 3 seconds to turn it on.
Connecting with the Dreamehome App How to Use 1. Download the Dreamehome App 2. Add Device Turn On/Off Do Not Disturb (DND) Mode Scan the QR code on the robot, or search "Dreamehome" in the app store to Open the Dreamehome app, tap " "...
How to Use How to Use Vacuum and Mop 3. Automatically empty the dust box and wash and dry the mop Mop after Vacuuming pads Note: When using the mop assembly for the first time, the robot performs the Enable the mopping after vacuuming function in the app, and the robot will "Vacuum and Mop"...
Routine Maintenance Routine Maintenance Parts Washboard Base To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance. The base station will perform washboard self-cleaning along with each mop 3.
Page 11
Routine Maintenance Routine Maintenance Used Water Tank Dust Bag 5. Rinse the washboard with clean water, wipe it clean and then put it back 1. Remove the used water tank, open its cover and pour out the used water. 1. Remove the dust tank cover and discard the dust bag. 3.
Page 12
Routine Maintenance Routine Maintenance Dust Box and Filter Main Brush Side Brush 3. Gently tap the basket of the filter to remove the dirt. 1. Open the robot cover and press the dust box clip to remove the dust box. 1.
Page 13
Routine Maintenance Routine Maintenance Robot Sensors and Charging Contacts Charging Contacts Mop Pad Mop Pad Holder Wipe sensors and charging contacts of the robot by using a soft and dry cloth, Clean the charging contacts and the signaling area of the base station with a Remove the mop pad from the mop pad holder to replace it.
Troubleshooting Troubleshooting Problem Solution Problem Solution The battery is low. Recharge the robot on the base and try again. It takes about 4.5 hours to fully charge the robot when its battery is low. The robot will not turn on. The temperature of the battery is too low or too high.
Troubleshooting Specifications Robot Base Station Problem Solution Model RLX63CE Model RCXE0307/RCXE0307-5 The station cannot Check whether the dust bag in the dust tank is full. automatically empty If the dust bag is not full, check whether there is any obstruction at the auto-empty vents of the robot, the base station, Charging Time Approx.
Battery Disposal and Removal The built-in lithium-ion battery contains substances that are hazardous to the environment. Before disposing of the battery, make sure the battery is removed by qualified technicians and discarded at an appropriate recycling facility. – the battery must be removed from the appliance before it is scrapped; –...
Need help?
Do you have a question about the X40 Ultra and is the answer not in the manual?
Questions and answers
Добрый день.подскажите, пжста, как подключить пылесос к водопроводу и канализации