Advertisement
Quick Links
Bamboo / Black Mobile Book Stand
Instruction Manual
SKU: CART-BK01B
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/cart-bk01b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo CART-BK01B
Summary of Contents for Vivo CART-BK01B
- Page 1 Bamboo / Black Mobile Book Stand Instruction Manual SKU: CART-BK01B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/cart-bk01b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 Inspect the four pole sections and locate Bottom Pole (D), which has three screw holes on one end and is threaded on the other. Connect Bottom Pole (D) and Support Plate (G) to Base (A) using M6x50mm Screws (S-A) and 5mm Allen Wrench (T-A). - Page 4 STEP 2 Inspect remaining three poles and indentify Middle Poles (E), which have external threading on one end. Twist and secure one Middle Pole onto Bottom Pole (D) over the external threading of Bottom Pole, then twist and secure remaining Middle Pole. Twist and secure Top Pole (F) onto the external threaded end of Middle Pole (E).
- Page 5 STEP 3 Slide Arm (H) onto assembled pole to your desired height and tighten using the 5mm Allen Wrench (T-A). Turn nut clockwise to tighten and counterclockwise to loosen as needed. STEP 4 Slide the Rubber Caps (K) onto the end of the Page Clips (J).
- Page 6 STEP 5 Attach assembled Page Clips (J) to front edge of Tray (I) using the ST3.5x10mm Screws (S-B) and a Phillips screwdriver. NOTE: Do not overtighten to assure smooth rotation and to prevent the holes from stripping out.
- Page 7 STEP 6 Fasten Tray (I) to Mounting Plate (H1) on Arm (H) using the ST3.5x10mm Screws (S-B) and a Phillips screwdriver. Adjust the angle of Tray (I) by loosening and tightening the tilt joint of Arm (H) using 5mm Allen Wrench (T-A).
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the CART-BK01B and is the answer not in the manual?
Questions and answers