Tyger TG-FF6C4298 Manual

FENDER FLARE
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLA-
TION. ONLY FOLLOW THE APPROVED INSTALLATION ACCORDING TO
THESE WRITTEN INSTRUCTIONS. FAILURE TO DO SO MAY CAUSE
DAMAGE TO YOUR VEHICLE AND INVALIDATE THE WARRANTY.
PRIOR TO INSTALLATION:
• Remove contents from box. Verify all parts are present and free
from any defects or damage.
• Make sure installation is done on a non-abrasive surface to avoid
scratching the flare surface.
• Verify the fit of each flare to the vehicle body to ensure you have
the correct flares for your vehicle.
• Remove existing decals and mud flaps on the vehicle that may
interfere with flare installation.
• Do not use any harsh abrasive detergent to clean the flare.
PAINTING:
• Painted flares cannot be returned. Test fit before painting. We are
not responsible for any costs that may incur if flares were painted
without test fitting.
• Clean surface to be painted with a good grade degreaser. Do not
use lacquer thinner or any solvent based product.
• Wipe flare surface completely dry with a tack rag prior to paint.
• Application of plastic adhesion promoter for PP plastic as per
your paint system manufacturer's recommendations is required.
• Use a high quality enamel or polyurethane automotive paint to
paint the flares.
WARNING
Dirt or debris may become lodged between flares and vehicle's
fenders causing scratching and paint wear from vehicle vibration.
TYGER is not responsible for any damage, and installation is done
with buyer's understanding that this damage may potentially
occur.
SAFETY INFORMATION
• Before driving, ensure that flare is properly secured to vehicle.
• Do not use automatic "brush-style" car wash.
• Periodically check all components for tightness.
TG-FF6C4298
Customer Support: www.TygerAuto.com/Contact
1/4
Customer Support 1-866-340-3038
Tools Required
Hardware Included
x4 x8
[A] [B]
x8
[E]
DAMAGED or MISSING PARTS?
www.TygerAuto.com/Contact
TM
x8 x4
[C] [D]