In-situ 750 Quick Start Manual

1 Charge the monitor.
a
Insert USB cable
connector into 5-way
socket (on left).
2 Connect sensor.
The SoliTech IR sensor requires a two-point calibration for accurate data. Refer to the SoliTech IR and
OxyTech RDO manuals for calibration instructions for each sensor.
a
Press On/Off to turn on
monitor.
Before saving data, set the date and time in the Monitor Config menu to ensure accurate time stamps.
Information subject to change without notice. In-Situ, In-Situ logo, "Water Simplified", VuLink, RDO, RuggedCable, TROLL,
BaroTROLL, HydroVu, VuSitu, Baro Merge, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©2024. All rights reserved. This product may be covered by patents identified at www.in-situ.com/patents
Box Contents
• 750 Portable Monitor
• Carrying bag
• Monitor cover
• USB cable
• Instructions
Getting Started
b
Insert the other end of the
USB cable into a charger.
b
Insert sensor cable
connector into 4-way
socket (on right).
750 Portable Monitor
c
Red LED shows monitor
is charging. Charge for 24
hours before first use.
c
Monitor displays
measurement. If the
screen turns off, press the
power button to resume
measurements.
Quick Start Guide
d
When light turns green,
monitor is fully charged.
Remove connector.
d
For the OxyTech RDO
sensor, use the left/right
arrow keys to view more
measurements.
2024-07-08 | 231271