convenience concepts NADIA 166599 Manual

Glass console table

Download this manual

NADIA GLASS CONSOLE TABLE

ASSEMBLY INSTRUCTIONS

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,

step by step instructions will guide you through the project from start to finish .

Feel confident that this will be a fun and rewarding project . The final product will be a quality

piece of furniture that will go together smoothly and give years of enjoyment .

Please do not return to the store

STOP

Broken or missing parts?

Need help with assembly?

Our Illinois based customer service team is ready to help with any problems or questions you may have.

Please give us a call (Toll Free) at 1-800-468-6447, or email us at parts@convenience-concepts.com.

Normal hours of Operation: M-F* 8am-4pm CST.

*Excludes Holidays

This product's warranty is only valid through authorized dealers.

166599

Need help?

Do you have a question about the NADIA 166599 and is the answer not in the manual?

Page 1 NADIA GLASS CONSOLE TABLE 166599 ASSEMBLY INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish . Feel confident that this will be a fun and rewarding project .
Page 2 Hardware List Polishing Cloth Screw Non-Slip Disk Allen Wrench Eyelet Screw Anchor (1pc) (12pcs) (12pcs) (1pc) (2pcs) (2pcs) Panel List Leg A Top Frame (1pc) (2pcs) Top Glass (1pc) Leg B (2pcs) (1pc) (1pc) *Please count and verify all parts before assembly .* Exploded View Page 2 of 4...
Page 3 *Assemble unit on carpe surface. Step 1 1. Connect leg a (3) and leg b (6) to top frame (2) using screws (A) and allen wrench (B) as shown. Leg position for legs marked is not interchangeable, they must be installed as shown. 70％...
Page 4 Step 4 1. Retighten all screws. 2. Using a slight angle, carefully insert top glass ( 1 ) and bottom glass ( 4 ) into unit. Step 5 1.Drill holes slightly smaller than anchors (G)into drywall and gently tap anchors into holes.