Elecom M-XGS30BBSK Series User Manual page 8

1) Click the button to switch between "PC1" and "PC2".
The LED will blink white when the connected device is "PC1" and green when
it is "PC2".
When paired with only one device on either "PC1" or "PC2", the existing connection will be lost
when you switch to the unpaired side.
Switching back to the side paired with a connected device will restore the connection.
2) Pair with the selected connected device.
To pair, please refer to "How to use" → "Connecting and setting up the mouse" → (OS
specific) → "2. Pairing with a PC".
Switch during use
1) Click the button to switch between "PC1" and "PC2".
2) When the device to be switched to is connected, the LED will light up for
about 3 seconds.
The LED will light up white when the connected device is "PC1" and green
when "PC2" is connected.
When paired with only one device on either "PC1" or "PC2", the existing connection will
be lost when you switch to the unpaired side.
Switching back to the side paired with a connected device will restore the connection.
Connecting and setting up the mouse
Windows®
1.
Turn the power ON
1) Remove the battery cover.