Elecom M-XGS30BBSK Series User Manual page 55

Never apply hot water.
Doing so can cause electric malfunctions.
Do not use organic solvents or ultraviolet lights.
Usage can result in deterioration of the housing components or paints, which can cause
damage to the exterior.
We recommend the usage of disposable gloves.
Please unplug the USB connector from this product and the PC.
When using any alcohol-based products, please check that it is appropriate for
the specific purpose and that it is used properly.
Please note that in the event that damage or abnormal operation to the product
is caused by the cleaning process, the customer will be fully responsible for the
cost of repair.
We recommend that you disinfect your hands before and after using PCs and
peripheral devices that are used by multiple people in order to prevent the
spread of infection through the equipment.
Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution.
Make sure there are no loose droplets and gently wipe the product using the cloth.
After wiping, dry thoroughly and wipe off any residual liquid.
* Do not spray any liquid onto the product directly. Doing so can cause electric
malfunctions.
When the mouse is not working properly
Try the following if the mouse operates abnormally or the connection is unstable.
① Check that the mouse is turned ON.
② Check that the battery is inserted correctly and that it is not depleted.
The protective film may have been left on the battery. Remove the protective film from the
battery before reinserting the battery.
Ensure that the battery is inserted with the terminals in the right orientation.
The mouse operation will become unstable when the battery is low. Refer to "Replacing the
battery..." and replace with a new battery as soon as possible.
The alkaline battery included with this product are only for confirming operability. The