Elecom M-XGS30BBSK Series User Manual page 7

⑥ LED light
During pairing standby state, the LED blinks.
The LED will light up for a period of time when the mouse is switched ON.
The LED will blink during use when the battery level is low.
The color of the LED changes depending on the device to which it is connected.
⑦ Device selection button
Use this to switch between devices connected to this product.
Please refer to "Switch connected
⑧ Optical sensor
The LED will light up blue when the battery is inserted into the mouse.
This sensor will detect mouse movements when you move the mouse.
* Please note that looking directly into the sensor light may hurt your eyes.
⑨ Pairing button
Pair the mouse with your deviceʼs Bluetooth module or a Bluetooth adapter.
⑩ Power switch
Turn the mouse power on (ON) and off (OFF).
⑪ Battery insulating tab
Remove this tab before using.
⑫ Battery cover
Remove this cover and insert the battery.
⑬ Battery storage compartment
Holds the battery.
Switch connected device
This product can be used to switch between two Bluetooth devices.
Switch between connected Bluetooth devices in the following way.
Switch when pairing
device".