Elecom M-BT5BL Series User Manual

Do not attempt to disassemble, modify or repair this product by
yourself, as this may cause a fire, electric shock or product damage.
Do not put this product in fire, as the product may burst,
resulting in a fire or injury.
Do not place this produc t in any of the following
environments:
• In a car exposed to sunlight, a place exposed to direct
sunlight, or a place that becomes hot (around a heater, etc.)
• In a moist place or a place where condensation may occur
• In an uneven place or a place exposed to vibration
• In a place where a magnetic field is generated (near a magnet, etc.)
Bluetooth®
• In a dusty place
This product does not have a waterproof structure. Use and
5-button Laser Mouse
store this product in a place where the product body will not
be splashed with water or other liquid.
M-BT5BL Series
Rain, water mist, juice, coffee, steam or sweat may also cause
product damage.
User's Guide
When you no longer need to use this product and the
battery, be sure to dispose of it in accordance with the local
ordinances and laws of your area.
Batteries
„ „
Use AAA alkaline batteries, AAA manganese batteries, or
rechargeable AAA nickel hydride battery with this product.
Thank you for purchasing the ELECOM M-BT5BL Series Bluetooth® 5-button
If this product will be unused for a long period of time,
Laser Mouse. The M-BT5BL is a 5-button wireless laser mouse that employs
remove the battery to avoid battery leakage and failure.
Bluetooth® wireless technology. It is equipped with Back and Forward
buttons that are handy for browsing the Internet, as well as a resolution
Cleaning the Mouse
„ „
adjustment button for changing mouse speed.
This manual describes the operating instructions and safety precautions If the product body becomes dirty, wipe it with a soft, dry cloth.
for using the M-BT5BL Series. Ensure that you have read this manual before
using the product. After reading this manual, store it somewhere safe for Use of a volatile liquid (paint thinner, benzene, alcohol, etc.)
future reference. may affect the material quality and colour of the product.
* Except in certain cases, the M-BT5BL Series is referred to as "this product" in
this manual.
Cautions for Wireless Equipment
This product is wireless equipment using the entire range
of the 2.4 GHz band and it is possible to avoid the band of
mobile object identification systems. FH-SS is used for the radio wave method. The
interference distance is 10 m.
The 2.4 GHz band is also used by medical equipment, Bluetooth, and wireless LAN
equipment conforming to the IEEE802.11b/11g /11n standard.
• Before using this product, check that there are no other "radio
stations"* operating nearby.
• If electromagnetic interference occurs between this product and
other "radio stations", move this product to another location or stop
Meaning of symbols
„ „
using this product.
* Other "radio stations" refer to industrial, scientific and medical devices using the
Failure to observe precautions may result in
WARNING 2.4 GHz band like this product, other radio stations of this type, licensed radio
serious personal injury or death due to fire,
station premises for mobile object identification system that is used in factory
electric shock, or other causes.
production lines, certain non-licensed low power radio stations and amateur
Failure to observe precautions may result in
radio stations.
CAUTION
personal injury due to electric shock or other
causes, and may damage other equipment.
Prohibited action
● Do not use this product with a device that may have a serious
Mandatory action function or influence. There are rare cases where an external
radio wave at the same frequency or the radio wave emitted
Situation that needs attention
from a mobile phone causes this product to malfunction, slow
down, or fail to operate.
Notes and reference information
●
Do not use this product in a hospital or other locations where
the use of radio waves is prohibited. The radio waves of this
Package Contents product may affect electronic and medical devices (e.g.
pacemaker).
●
The use of a wireless mouse in an aircraft is prohibited by
This product's packaging contains the items listed below. Before using
aviation law because doing so may interfere with flight safety.
the product, check that all items are present. We make every effort to
Turn off the power of the mouse body before boarding an
ensure that all products are packaged correctly. However, in the event
aircraft and do not use it in the aircraft.
that an item is missing or damaged, contact the retailer from whom you
* ELECOM is not liable for any accident or social damages
purchased the product.
incurred by the failure of this product.
• Mouse x1
• AAA alkaline battery x1
Cautions for Laser Mouse
• User's Manual x1
Safety Precautions
Though this product complies with the IEC60825-1 Class 1 laser safety
standard to ensure safety, pay special attention to the following before use.
Observe these precautions carefully to avoid personal injury, damage,
(1) Never observe the laser beam by using an optical measure such as
fire, and other problems.
a microscope or magnifier or view the laser with the naked eye for
a long period of time. Doing so may have an adverse effect on the
WARNING
eye. (Some laser beams cannot be seen with the naked eye.)
If a foreign object (water, metal chip, etc.) enters the product, (2) Never aim the rear surface of the mouse at a person's eyes, as this is
very dangerous.
immediately stop using the product and disconnect the
(3) The laser sensor may not work on glass or mirrored surfaces.
receiver unit from the PC, and remove the battery from
(4) Do not use this product for any application other than as a PC
the mouse. If you continue to use the product under these
mouse.
conditions, it may cause a fire or electric shock.
(5) I f this produc t is subjec ted to temperatures beyond its
If an abnormality is found with this product (emission of heat,
specifications, turn off the PC, and do not use the product until the
smoke or abnormal smell from the product), immediately stop
temperature returns to the operable range.
using the product, shutdown the PC, and after thoroughly
(6) If this product is not operating normally, turn off the PC.
checking that heat from the product will not cause burns,
remove the battery from the mouse. After doing this, contact
the retailer from whom you purchased the product.
Do not drop or hit this product.
If this product is damaged, immediately stop using the
product, and remove the battery from the mouse.
If you continue to use the product under these conditions, it
may cause a fire or electric shock.
WARNING Part Names
b
d
a
f
c
CAUTION
e
l
a Tilt wheel
The tilt wheel can be turned back and forward with your finger or
pressed like a button to operate the PC.
Tilting the tilt wheel to the right or left lets you scroll horizontally.
You must download and install ELECOM MouseAssistant 2 for
Windows from our company's web site to use the horizontal
scrolling function with Windows.
Using the horizontal scrolling and button allocation
functions (on the separate sheet)
b Right button
Used for right-click operation.
CAUTION
c Left button
Used for left-click operation.
d Forward button/ e Back button
Forward button
Performs the forward action in a
web browser.
Back button
Performs the back action in a
web browser.
Forward button
To use the Back and Forward buttons with a Mac, you need to
install the ELECOM Mouse Assistant 2 Mac OS X version that can
be downloaded from the ELECOM website.
Refer to " 5. Using the horizontal scrolling and button
allocation functions" (Page 3)
f Remaining battery level indicator lamp/pairing
indicator lamp
WARNING
⿠
Turns red when the mouse is in a pairing standby state.
⿠
Indicates when to replace the batteries.
* Flashes in red for a certain period of time if the remaining
battery level gets low during use.
g Pairing button
Pairs the mouse with a PC Bluetooth module or a Bluetooth adapter.
h Laser sensor
When the mouse body is moved, this sensor detects mouse
movement.
* Never observe the laser beam using an optical means such as a
microscope or magnifying glass or view the laser with the naked
eye for a long period of time. Doing so may damage the eyes.
(Some laser beams cannot be seen with the naked eye.)
i Power switch
Used to turn the mouse body on and off.
j Battery cover
This cover is removed to install batteries.
k Battery housing
Batteries are inserted here.
l Battery removal sheet
Used to remove the batteries from the battery housing.
Initial Setup Procedure
When using this product for the first time, operate and configure this
g h
product and the PC in the order shown below.
i
• To use this product, your PC must support the Bluetooth HID
profile or have a Bluetooth adapter connected.
• Do not remove your existing mouse until this product is
successfully connected. You need to use your existing mouse
to configure the PC.
j
1
Insert the batteries
2
Turn on the power
k
3
Pair the mouse with the PC
4
Check mouse operation
* Refer to the back of this sheet.
1
Installing / Replacing the Battery
Before using this product, install two AAA battery in the mouse body.
Remove the battery cover.
Insert the battery adjusting to the
indication of the Battery removal
sheet.
y Make sure that the
polarity is correct.
Battery removal sheet
Install the battery cover as before.
Back button
Replacing the Battery
„ „
Remove the battery cover.
Remove the battery using the battery
removal sheet.
Insert the battery.
y Do not mix different types
of batteries or use old
batteries with new batteries
to avoid battery leakage
and failure.
Battery removal sheet
Install the battery cover as before.
2
Turning on the mouse
When using this product, turn the mouse body power on.
Slide the power switch to the ON position.
When not using this product, turn the mouse
body off to save battery power.
Slide the power switch to the OFF position.
Restoring from sleep state
„ „
Move the mouse.
To reduce battery drain, the mouse enters sleep mode automatically
if it is left without being operated for a certain period of time with
the power or switch turned on.
- 1 -
3
Pairing the Mouse with the PC
To connect this product to the PC using Bluetooth, you need to pair the product with the PC.
• Pairing involves registering Bluetooth devices (in this case, the mouse and the PC) with each other, and authorising a connection with a registered
device.
•
Use your existing mouse or touch pad to operate the PC until the pairing process is completed successfully.
When using Windows®
Windows Vista® (–SP1) and Windows® XP
This section describes the procedure when using the standard „ „
Windows® Bluetooth function.
* Screen appearance may change depending on operating system, but
Windows® 7 and Windows Vista® SP2 the procedure is the same.
„ „
I n t h e t a s k t r a y o r t h e
* Screen appearance may change depending on operating system, but
the procedure is the same. notification area, right-click the
Bluetooth icon (
In the notification area,
[Add a Bluetooth Device].
click , then right-click
the Bluetooth icon ( )
The [Add Bluetooth Device
and click [Add a Device]. Wizard] is displayed.
The [Add a Device] window
is displayed.
Select the [My device is set
up and ready to be found.]
• If the is displayed in the notification area in Windows® 7,
check box and then click
right-click and then click [Add a Device].
• If no icon is displayed, click the [Start] button, click
[Control Panel], and then click [Add a Device].
The system starts searching for
Bluetooth devices to add.
Press the pairing button
on this product.
Hold down the pairing button
on this product while the
torch icon (
The pairing indicator lamp turns
on during the pairing procedure
and turns off when the procedure
The pairing indicator lamp turns
is complete (step ).
on during the pairing procedure
Pairing button
and turns off when the procedure
is complete (step
If this product is not displayed in the list, check that its
power is turned on, press the pairing button, and then
click .
Click [ELECOM BLUETOOTH
LASER MOUSE] and then click
.
Click [ELECOM BLUETOOTH
Product registration starts.
LASER MOUSE] and then
click
Click .
Select [Don't use a passkey],
and click
Product registration starts.
[ELECOM BLUETOOTH LASER
MOUSE] is added to the [Bluetooth
Devices] window.
Click
You can now use the mouse.
Refer to "4. Checking Mouse Operation" on the back of this sheet to
confirm that the mouse works correctly.
[ELECOM BLUETOOTH LASER MOUSE] is added
to the [Bluetooth Devices] window.
Click
You can now use the mouse.
Refer to "4. Checking Mouse Operation" on the back of this sheet to
confirm that the mouse works correctly.
) and click
If the icon is not displayed, click the [Start] button, click
[Control Panel], click [Hardware and Sound], and then
click [Bluetooth Devices]. When the [Bluetooth Devices]
window is displayed, click [Add].
.
is displayed.
).
Pairing button
If this product is not displayed in the list, check that its
power is turned on, press the pairing button, and then
click .
.
.
.
.