AGI Westfield X2 13-74 Assembly Manual
  1. Manuals
  2. Brands
  3. AGI Manuals
  4. Farm Equipment
  5. Westfield X2 13-74
  6. Assembly manual

AGI Westfield X2 13-74 Assembly Manual

Swing-away grain auger
Hide thumbs Also See for Westfield X2 13-74:
Table of Contents

Advertisement

Quick Links

Download this manual
X² & HX² 13" Series
Swing-Away Grain Auger
Assembly Manual
This manual applies to:
AGI Westfield X² 13-74, 13-84, 13-94
AGI X² 13-74, 13-84, 13-94
AGI Hutchinson HX² 13-74, 13-84, 13-94
AGI Mayrath HX² 13-74, 13-84, 13-94
Read this manual before using product. Failure to
follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
LOOKING FOR PARTS?
Check out our online
Parts Catalog!
Part Number: 31176 R1
Revised: June 2024
Original Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Westfield X2 13-74 and is the answer not in the manual?

Questions and answers

Related Manuals for AGI Westfield X2 13-74

Summary of Contents for AGI Westfield X2 13-74

  • Page 1 X² & HX² 13" Series Swing-Away Grain Auger Assembly Manual This manual applies to: AGI Westfield X² 13-74, 13-84, 13-94 AGI X² 13-74, 13-84, 13-94 AGI Hutchinson HX² 13-74, 13-84, 13-94 AGI Mayrath HX² 13-74, 13-84, 13-94 LOOKING FOR PARTS?
  • Page 2 New in this Manual The following changes have been made in this revision of the manual: Description Section Modified detail for the short side truss bracket. Section 4.6 – Connect Auger Tubes (84'/94') on page Added assembly note to align the flighting. Section 4.7 –...

  • Page 3: Table Of Contents

    X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER CONTENTS 1. Introduction ............................5 2. Safety............................... 6 2.1 Safety Alert Symbol and Signal Words..................6 2.2 General Safety Information....................... 6 2.3 Rotating Flighting Safety ......................7 2.4 Rotating Parts Safety......................... 7 2.5 Hand Winch Safety ........................
  • Page 4 X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 5. Specifications ............................65 6. Appendix ............................... 66 6.1 Bolt Torque..........................66 7. AGI Limited Warranty........................... 67 31176 R1...

  • Page 5: Introduction

    Before assembling, please read this manual. Familiarize yourself with the process and the necessary precautions for efficient and safe assembly of this AGI Swing-Away Grain Auger. Everyone present at the assembly site is required to be familiar with all safety precautions.

  • Page 6: Safety

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 2. Safety 2.1. Safety Alert Symbol and Signal Words This safety alert symbol indicates important safety messages in this manual. When you see this symbol, be alert to the possibility of injury or death, carefully read the message that follows, and inform others.

  • Page 7: Rotating Flighting Safety

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 2.3. Rotating Flighting Safety • KEEP AWAY from rotating flighting. • DO NOT remove or modify flighting guards, doors, or covers. Keep in good working order. Have replaced if damaged. •...

  • Page 8: Hydraulic Winch Safety

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 2.6. Hydraulic Winch Safety When Equipped: • Keep away from rotating cable drum and winch cable. Do not touch or grab cable while winch is being operated or use hands to guide the cable. •...

  • Page 9: Hydraulic Power Safety

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 2.7.2 Hydraulic Power Safety Power Source • Refer to the rules and regulations applicable to the power source operating the hydraulic system. • Do not connect or disconnect hydraulic lines while system is under pressure.

  • Page 10: Tire Safety

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 2.8. Tire Safety Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an explosion that may result in serious injury or death. •...

  • Page 11: Safety Equipment

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Steel-Toe Boots • Wear steel-toe boots to protect feet from falling debris. Work Gloves • Wear work gloves to protect your hands from sharp and rough edges. Dust Mask •...

  • Page 12: Decal Installation/Replacement

    2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 2.11.1 Decal Installation/Replacement 1. Decal area must be clean and dry, with a temperature above 50°F (10°C). 2. Decide on the exact position before you remove the backing paper. 3.
  • Page 13 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1. Safety Decals Part Number Description 20813 DANGER ROTATING FLIGHTING HAZARD To prevent death or serious injury: • KEEP AWAY from rotating auger flighting. • DO NOT remove or modify auger flighting guards, doors, or covers.
  • Page 14 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20816 DANGER ELECTROCUTION HAZARD To prevent death or serious injury: • When operating or moving, keep equipment away from overhead power lines and devices. •...
  • Page 15 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20803 WARNING MISSING GUARD HAZARD To prevent serious injury or death, shut off power and reattach guard before operating machine. 20804 WARNING ENTANGLEMENT HAZARD To prevent serious injury or death:...
  • Page 16 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20805 WARNING HIGH PRESSURE FLUID HAZARD Hydraulic fluid can cause serious injury if it Hydraulic fluid can cause serious injury if it penetrates the skin.
  • Page 17 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20807 WARNING To prevent serious injury or death: • Read and understand the manual before assembling, operating, or maintaining the equipment. •...
  • Page 18 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20811 WARNING UPENDING HAZARD To prevent death or serious injury: • Anchor intake end and/or support discharge end to prevent upending. •...
  • Page 19 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20812 WARNING ROLLOVER / TRANSPORT HAZARD To prevent serious injury or death: • Fully extend axles before raising tube. • Retract axles before transporting. 17107 CAUTION To prevent personal injury or...
  • Page 20 2. SAFETY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 17531 NOTICE To prevent damage during auger- to-tractor hookup: • Follow dimensions above for correct auger-to-tractor hookup. • Auger must be on level ground and in full down position when measuring.

  • Page 21: Features

    3. FEATURES X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 3. Features Features 74' Model Features discharge spout boot truss tower swing cable adjustment hydraulic cylinders lift arm 31176 R1...
  • Page 22 3. FEATURES X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 84'/94' Model Features discharge spout boot truss tower swing truss adjustment cable adjustment side truss hydraulic cylinders lift arm 31176 R1...
  • Page 23 3. FEATURES X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Swing Features spout head service cover swing tube maintenance hatch hopper flights and flight guarding overflow panel Grain Transfer Boot Features hitch jack hitch PTO holder ball valve hose holder clean-out hatch side access panel manual winch (hopper)

  • Page 24: Assembly

    Take pictures of shipments prior to, or just after, unloading if there are any damages. Report missing or damaged parts immediately to ensure that proper credit is received from AGI or your representative, and to ensure that any missing parts can be shipped quickly to avoid holding up the assembly process.

  • Page 25: Tube Layout And Branding Decal Placement

    Otherwise, use some form of shim to keep the tubes level across all of the support stands. Important Strap tubes to the support stands to prevent the tubes from rolling off the stands. Figure 1. 74' Auger Tube Sections MODEL/SIZE DECAL AGI DECAL 35" (89 cm) 260" (660 cm) BRAND DECAL 4"...
  • Page 26 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Figure 2. 84' Auger Tube Sections MODEL/SIZE DECAL AGI DECAL 35" (89 cm) 260" (660 cm) BRAND DECAL 124" (315 cm) Figure 3. 94' Auger Tube Sections MODEL/SIZE DECAL AGI DECAL 35"...
  • Page 27 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Apply the Logo and Model Decals on the Auger Tubes Important Do not cover any existing safety or instruction decals with the model decals. 1. Prepare surface by cleaning thoroughly with soap and water. Surface must be clean and free of dirt, grime, rust and oil.

  • Page 28: Connect Auger Tubes (74')

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.5. Connect Auger Tubes (74') This section applies to the 13-74 swing-away augers. Assembly Notes: • Always strap tubes to the support stands to prevent the tubes from rolling off the stands. •...
  • Page 29 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Long Side Trussing at Tube Connections Assembly Notes: • Always strap tubes to the support stands to prevent the tubes from rolling off the stands. • Align flighting to ensure a continual spiral of auger surface. flight connecting shaft lock nut, 1/2"...

  • Page 30: Install The Boot On The Auger Tube

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Short Side Trussing — Lower and Upper Tubes side truss bracket, short lock nut, 7/16" bolt, 7/16" x 1" 4.7. Install the Boot on the Auger Tube Components are heavy and create a crushing hazard if improperly handled. Be sure to use proper hoisting equipment and procedures, and ensure lifting apparatus is secure.

  • Page 31: Install The Boot Tow Bar

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.8. Install the Boot Tow Bar tow bar assembly reducer/reverser reverser bolt, 3/4" x 5-1/2" regular lock nut, 3/4" 31176 R1...

  • Page 32: Set The Thrust Adjuster

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.9. Set the Thrust Adjuster 1. Remove the dust cap. 2. Tighten the lock nut until the bushing is snug. The bushing is snug when it can no longer be moved by hand. 3.

  • Page 33: Auger Tube Truss Assembly (74')

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.10. Auger Tube Truss Assembly (74') This section applies to the 13-74 swing-away augers. Install the Cable Bridges Assembly Note: • The truss tower extension bracket is not required for augers with the 15' swing tube, x-tend hopper, and gulp hopper.
  • Page 34 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 5. Pull the cable: • over the high (middle) truss tower, • under the tube and around the middle cable return bracket, • back over the middle cable bridge, •...
  • Page 35 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Nut Torque 9-1/2” (24 cm) Cable Clamp (Minimum Turn Back Length) 20 ft·lb 5/16" STEP 1: 30 ft·lb 3/8" 8-1/2” (21.6 cm) STEP 2: Installing the Truss Cable (74') cable, 36' eyebolt cable, 73'...

  • Page 36: Auger Tube Truss Assembly (84'/94')

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.11. Auger Tube Truss Assembly (84'/94') This section applies to the 13-84 and 13-94 swing-away augers. 4.11.1 High and Low Towers 13-84 13-94 truss tower, low bolt, 7/16" x 1-1/4" truss tower, high lock nut, 7/16"...

  • Page 37: Top Truss Tube

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.11.2 Top Truss Tube 13-84 13-94 Assembly Notes: • Work from discharge to intake. • Once top trussing is installed, measure each section from the hole of the bottom top tube connection plate to the hole of the tab on the auger tube to ensure they are square and have the same length.
  • Page 38 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER truss tower bolt, 5/8" x 1-1/2" top truss tube flat washer, 5/8" bolt, 1/2" x 1-3/4" lock nut, 5/8" lock nut, 1/2" center adjust mount top truss tube w/ threaded rod — short bolt, 1/2"...

  • Page 39: Cross Brace

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.11.3 Cross Brace 13-84 13-94 Assembly Note: • Hand tighten all nuts on members only. • The long cross brace closest to the intake end should NOT be installed for augers with a 15' swing tube. cross brace —...
  • Page 40 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER cross brace — short lock nut, 1/2" cross brace shackle oval lock nut, 3/4" bolt, 1/2" x 1-1/2" cross brace lock nut, 1/2" bolt, 1/2" x 1-3/4" bolt, 1/2" x 2-1/2" cross brace —...

  • Page 41: Tube Bow

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.11.4 Tube Bow Support auger tube at the discharge end and loosen the 1" UNC Nut of the top tube at that location. Raise end up approximately 6" (15.2 cm) to provide a small upward bow. Fasten top tube connection nuts and cross member nuts by working from discharge to intake.

  • Page 42: Install Truss Cables (84'/94')

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.12. Install Truss Cables (84'/94') This section applies to the 13-84 and 13-94 swing-away augers. 24" (61cm) (minimum overlap length) 9-1/2" (24cm) 8-1/2" (21.6cm) (minimum turn-back length) cable eyebolt cable clamp, 3/8"...
  • Page 43 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER • Check the tension in the side truss cables. Hang a 25 lb weight at the center of the side truss and measure the cable deflection. Ensure a maximum deflection of 2-1/4". 5.

  • Page 44: Assemble The Auger Frame

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.13. Assemble the Auger Frame Components are heavy and create a crushing and pinching hazard if improperly handled. Be sure to use proper hoisting equipment and procedures, and ensure lifting apparatus is secure. Lockout the lifting apparatus before working around or under the raised components.
  • Page 45 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Installing the Deflector Assembly (74' Models only) Assembly Note: • Position the deflector assembly on the same side that the hopper will be operating on. deflector assembly skid clamp bolt, 1/2"...
  • Page 46 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Installing the Bowtie and Bowtie Cross Brace Assembly Note: • A steel punch may be necessary to align the bowtie bolt holes. bowtie lock nut, 5/8" bowtie cross brace bolt, 1/2"...
  • Page 47 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Attaching the Upper Scissor and Scissor Support Assembly Notes: • Ensure the hub and wheel mounting surfaces are free from rust and debris. • Torque the wheel bolts to 100 ft·lb ± 10 ft·lb using the pattern shown. •...

  • Page 48: Installing The Hydraulic Cylinders

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Installing the Scissor Pivot Mount Assembly Note: • Grease the upper scissor frame attach pin. upper scissor pivot mount roll pin, 5/16" x 2-1/2" upper scissor frame attach pin 4.14.

  • Page 49: Connect The Auger Tube To The Frame

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.15. Connect the Auger Tube to the Frame STRONG SLING OR CHAIN Important Be sure to use proper hoisting equipment and procedures when raising the discharge end of the auger. Lock out the hoist apparatus prior to working around or under the raised tube.
  • Page 50 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Attaching the Stabilizer Braces to the Frame stabilizer bracket bolt, 5/8" x 2" stabilizer brace bolt, 5/8" x 2-1/4" bolt, 5/8" x 1-1/2" lock nut, 5/8" Connecting the Upper Scissor Frame to the Tube Assembly Notes: •...

  • Page 51: Connecting Hydraulic Hose To Cylinders

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.16. Connecting Hydraulic Hose to Cylinders Note Refer to the Appendix for hydraulic fitting tightening specifications. Note Elbow fittings are factory installed. Use thread sealant on fittings and hose threads (not supplied). 1.
  • Page 52 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Hydraulic Hose Routing bulkhead coupler fitting hydraulic hose assembly with ball valve 31176 R1...

  • Page 53: Connect The Pto Driveline

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.17. Connect the PTO Driveline Assembly Notes: • Clean paint or dirt off of PTO driveline and flighting shaft ends. • Make sure that the square key is in place on the flighting shaft. •...

  • Page 54: Install Low Profile Intake Hopper

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.18. Install Low Profile Intake Hopper Components are heavy and create a crushing hazard if improperly handled. Be sure to use proper hoisting equipment and procedures, and ensure lifting apparatus is secure. Lockout the lifting apparatus before working around or under the raised components.
  • Page 55 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Assembly Notes: • Tighten set screws on u-joints, then close and secure the service door. • There are 3 height settings for the hopper wheels that can be used according to preference. •...
  • Page 56 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 15' Swing Tube Assembly Only (Optional) transition bolt, 7/16" x 1-1/4" swing lift bracket lock nut, 7/16" Assembly Notes: • Open the latches and rotate the spout lid open, so that it lies down on the top of the swing tube. •...

  • Page 57: Install The Hopper Lift Arm And Winch

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER spout head lid bolt, 3/8" x 3/4" spout head retainer latch spout head spacer 4.19. Install the Hopper Lift Arm and Winch Augers with 10' Swing Tube Assembly (Standard) Assembly Notes: •...
  • Page 58 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Augers with 15' Swing Tube Assembly (Optional) Assembly Notes: • Determine which side of the auger the hopper will be operating on. • Position the lift arm assembly on top of the auger tube with the arm overhanging the side that the hopper will be operating on.
  • Page 59 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Manual Winch Installation Right Side Left Side Assembly Note: • Position the winch assembly on the opposite side that the hopper will be operating on. boot winch assembly hairpin 31176 R1...
  • Page 60 4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER Winch Cable Assembly Notes: • Thread the cable through the hopper lift arm and pull the cable to the winch. • Wrap the cable over and around the winch spool at least three times, then insert the cable end through the hole provided in the side of the spool and secure the end with the provided cable clamp.

  • Page 61: Hopper Transport Position

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.20. Hopper Transport Position Augers with 10' Swing Tube Assembly (Standard) Assembly Note: • Feed side of hopper must face the main auger when in transport. safety chain winch cable Augers with 15' Swing Tube Assembly (Optional) Assembly Note: •...

  • Page 62: Install The Hitch Jack

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.21. Install the Hitch Jack The jack is attached to the auger with a pin at the pivot point. To install: 1. Elevate the auger boot (intake end) approximately 2' (61 cm) with a front-end loader and sling, and install the jack in a vertical position.

  • Page 63: Install The Plastic Manual Container

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.22. Install the Plastic Manual Container Assembly Note: • Before beginning installation, ensure that all winch/auger lift controls are locked in place and shut down and/or lock out auger. plastic manual holder self tapping screw 31176 R1...

  • Page 64: Install The Retroreflective Strips

    4. ASSEMBLY X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 4.23. Install the Retroreflective Strips Spout 2" (5.1 cm) Lower Arms 74' Models: 20" (50.8 cm) 84' Models: 35" (88.9 cm) 94' Models: 65" (165.1 cm) 11" (27.9 cm) Assembly Note: •...

  • Page 65: Specifications

    5. SPECIFICATIONS X² & HX² 13" SERIES – SWING-AWAY GRAIN AUGER 5. Specifications Specification 13-74 13-84 13-94 13" (33.0 cm) Tube Size CAPACITIES Unloading Rate 8700-9600 Bu/Hr TRANSPORT DIMENSIONS Length 75' 8" (23.1 m) 85' 8" (26.1 m) 95' 8" (29.2 m) 11'8"...

  • Page 66: Appendix

    Tighten all bolts to the torque specified, unless otherwise noted. Check tightness periodically, using Table 2 as a guide. Replace the hardware with the same strength bolt, contact AGI if you are unsure. Table 2. Recommended Bolt Torque Threads per Recommended Torque (ft-lb)

  • Page 67: Agi Limited Warranty

    7. AGI Limited Warranty This warranty relates to AGI Augers (the “Product”) sold by AGI, (referred to herein as the “Seller”) and applies only to the first user of the Product (meaning a purchaser directly from the Seller or from an authorized dealer or distributor of the Product, referred to herein as the “Buyer”).
  • Page 68 AGI is a leading provider of equipment solutions for agriculture bulk commodities including seed, fertilizer, grain, and feed systems with a growing platform in providing equipment and solutions for food processing facilities. AGI has manufacturing facilities in Canada, the United States, the United Kingdom, Brazil, South Africa, India and Italy and distributes its products globally.

This manual is also suitable for:

Westfield x2 13-84Westfield x2 13-94X2 13-74X2 13-84X2 13-94Hutchinson hx2 13-74 ... Show all

Table of Contents