1. Manuals
  2. Brands
  3. AGI Manuals
  4. Farm Equipment
  5. WHEATHEART X Series
  6. Assembly and operation manual

AGI WHEATHEART X Series Assembly And Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
X-SERIES 13" AUGERS
X130-74, X130-84, X130-94
ASSEMBLY AND OPERATION MANUAL
ORIGINAL INSTRUCTIONS
Read this manual before using product. Failure
to follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
Part Number: 30787 R2
Revised: 20/8/2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WHEATHEART X Series and is the answer not in the manual?

Questions and answers

Related Manuals for AGI WHEATHEART X Series

Summary of Contents for AGI WHEATHEART X Series

  • Page 1 X-SERIES 13" AUGERS X130-74, X130-84, X130-94 ASSEMBLY AND OPERATION MANUAL ORIGINAL INSTRUCTIONS Read this manual before using product. Failure Part Number: 30787 R2 to follow instructions and safety precautions can Revised: 20/8/2015 result in serious injury, death, or property damage. Keep manual for future reference.
  • Page 2 This product has been designed and constructed according to general engineering standards . Other local regulations may apply and must be followed by the operator. We strongly recommend that all personnel associated with this equipment be trained in the correct operational and safety procedures required for this product. Periodic reviews of this manual with all employees should be standard practice.

  • Page 3: Table Of Contents

    - X-S 13" A HEATHEART ERIES UGERS X130-74, X130-84, X130-94 TABLE OF CONTENTS 1. Introduction .......................... 7 1.1. Overview ........................8 1.1.1. Auger Power Source .................. 8 1.1.2. Grain Transfer Boot ..................9 1.1.3. Grain Hopper .................... 10 1.1.4. Auger Tube Hydraulic Lift ................. 11 2.
  • Page 4 - X-S 13" A HEATHEART ERIES UGERS X130-74, X130-84, X130-94 TABLE OF CONTENTS 4. Transport..........................79 4.1. Transport Procedure....................79 5. Placement ........................... 83 5.1. Placement Procedure ..................... 83 5.2. Positioning Tractor for Right-angle Drive Operation..........87 6. Operation ..........................89 6.1.
  • Page 5 - X-S 13" A HEATHEART ERIES UGERS X130-74, X130-84, X130-94 10. Appendix......................... 119 10.1. Specifications ..................... 119 10.2. Bolt Torque Values..................... 120 Warranty Registration ......................123 Limited Warranty ........................125 30787 R2...
  • Page 6 - X-S 13" A HEATHEART ERIES UGERS X130-74, X130-84, X130-94 30787 R2...

  • Page 7: Introduction

    - X-S 13" A 1. I HEATHEART ERIES UGERS NTRODUCTION X130-74, X130-84, X130-94 1. Introduction Congratulations on the purchase of your new Wheatheart X13 Series Auger. This equipment will complement your agricultural operation by safely and efficiently moving grain, pulse crops, fertilizer, and any other granular materials. Many of the features incorporated into this machine are the result of suggestions made by customers like you.

  • Page 8: Overview

    1. I - X-S 13" A NTRODUCTION HEATHEART ERIES UGERS 1.1. O X130-74, X130-84, X130-94 VERVIEW 1.1. OVERVIEW X13 augers are equipped with standard features that include a hydraulically controlled main auger tube lift, a low-profile grain hopper (left or right side operation), service access doors, and a PTO driveline for auger power.

  • Page 9: Grain Transfer Boot

    - X-S 13" A 1. I HEATHEART ERIES UGERS NTRODUCTION X130-74, X130-84, X130-94 1.1. O VERVIEW Figure 1.2 Right Angle PTO Driveline Kit 1.1.2. G RAIN RANSFER The grain transfer boot is located at the bottom of the main auger tube, and contains gearing for power transfer as well as flights for transferring grain.

  • Page 10: Grain Hopper

    1. I - X-S 13" A NTRODUCTION HEATHEART ERIES UGERS 1.1. O X130-74, X130-84, X130-94 VERVIEW PTO driveline connection (including connection to the optional 540 RPM PTO Reverser and 1000 RPM PTO Drive) is provided on the back of the boot, above the tractor hitch (and hitch jack).

  • Page 11: Auger Tube Hydraulic Lift

    - X-S 13" A 1. I HEATHEART ERIES UGERS NTRODUCTION X130-74, X130-84, X130-94 1.1. O VERVIEW SPOUT HEAD SWING ARM MAINTENANCE HATCH FLIGHTS AND FLIGHT GUARDING BOOT MAIN AUGER TUBE INTAKE HOPPER Figure 1.4 Grain Hopper HOPPER LIFT ARM SAFETY CHAIN AND HOOK WINCH CABLE AND HOOK Figure 1.5 Grain Hopper Lifted into Transport Position 1.1.4.
  • Page 12 1. I - X-S 13" A NTRODUCTION HEATHEART ERIES UGERS 1.1. O X130-74, X130-84, X130-94 VERVIEW 30787 R2...

  • Page 13: Safety

    - X-S 13" A 2. S HEATHEART ERIES UGERS AFETY X130-74, X130-84, X130-94 2.1. G ENERAL AFETY NFORMATION 2. Safety 2.1. GENERAL SAFETY INFORMATION The Safety Alert symbol identifies important safety messages on the product and in the manual. When you see this symbol, be alert to the possibility of personal injury or death.

  • Page 14: Assembly Safety

    2. S - X-S 13" A AFETY HEATHEART ERIES UGERS 2.2. A X130-74, X130-84, X130-94 SSEMBLY AFETY YOU are responsible for the SAFE use and maintenance of your equipment. YOU must ensure that you and anyone else who is going to work around the equipment understands all procedures and related SAFETY information contained in this manual.

  • Page 15: Operating Safety

    - X-S 13" A 2. S HEATHEART ERIES UGERS AFETY X130-74, X130-84, X130-94 2.3. O PERATING AFETY 2.3. OPERATING SAFETY • Ensure guards are installed and secure. • Clear the work area of untrained peo- ple. • Clean the work area to prevent slip- ping or trip- ping.

  • Page 16: Pto Driveline Safety

    2. S - X-S 13" A AFETY HEATHEART ERIES UGERS 2.5. PTO D X130-74, X130-84, X130-94 RIVELINE AFETY • Do not attempt any makeshift repairs to the hydraulic fittings or hoses by using tape, clamps, or cements. The hydraulic system operates under extremely high-pressure.

  • Page 17: Transport Safety

    - X-S 13" A 2. S HEATHEART ERIES UGERS AFETY X130-74, X130-84, X130-94 2.7. T RANSPORT AFETY 2.7. TRANSPORT SAFETY • Ensure tires are inflated to the tire manufacturer’s recommended pressure. • Make sure that all lights and reflectors required by the local highway and transport authorities are in place, are functioning, and can be seen clearly by all overtaking and oncoming traffic.Check with local authorities regarding transportation of agricultural equipment on public roads.

  • Page 18: Safety Decals

    2. S - X-S 13" A AFETY HEATHEART ERIES UGERS 2.10. S X130-74, X130-84, X130-94 AFETY ECALS 2.10. SAFETY DECALS • Keep safety decals clean and legible at all times. • Replace safety decals that are missing or have become illegible. See decal location figures that follow.
  • Page 19 - X-S 13" A 2. S HEATHEART ERIES UGERS AFETY X130-74, X130-84, X130-94 2.10. S AFETY ECALS WARNING HIGH PRESSURE FLUID HAZARD Hydraulic fluid can cause serious injury if it penetrates the skin. If it does, see a doctor immediately. •...
  • Page 20 2. S - X-S 13" A AFETY HEATHEART ERIES UGERS 2.10. S X130-74, X130-84, X130-94 AFETY ECALS DECAL #17531 NOTICE To prevent damage during auger-to- tractor hookup: • Follow dimensions above for correct auger-to-tractor hookup. • Auger must be on level ground and in full down position when measuring.
  • Page 21 - X-S 13" A 2. S HEATHEART ERIES UGERS AFETY X130-74, X130-84, X130-94 2.10. S AFETY ECALS DECAL #20816 DECAL #20813 DECAL # 17378 DANGER DANGER NOTICE This equipment is not intended for transport on public roads. If it must be moved, check local regulations.
  • Page 22 2. S - X-S 13" A AFETY HEATHEART ERIES UGERS 2.10. S X130-74, X130-84, X130-94 AFETY ECALS WARNING WARNING DANGER TRANSPORT HAZARD To prevent serious injury or death: To prevent serious injury or death: • Securely attach equipment to vehicle with correct •...
  • Page 23 - X-S 13" A 2. S HEATHEART ERIES UGERS AFETY X130-74, X130-84, X130-94 2.10. S AFETY ECALS WARNING ROLLOVER / TRANSPORT HAZARD To prevent serious injury or death: • Fully extend axles before raising auger tube. 20812 Made in • Retract axles before transporting. Canada DECAL # 20812 Figure 2.6...
  • Page 24 2. S - X-S 13" A AFETY HEATHEART ERIES UGERS 2.10. S X130-74, X130-84, X130-94 AFETY ECALS 30787 R2...

  • Page 25: Assembly

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.1. G ENERAL SSEMBLY 3. Assembly WARNING Before continuing, ensure you have read and understand the relevant information in the safety section. Safety information is provided to help prevent serious injury, death, or property damage.
  • Page 26 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.1. G X130-74, X130-84, X130-94 ENERAL SSEMBLY See Table 3.1. for a list of assembly procedures. Table 3.1. X13 Auger Assembly Procedures Procedure Page Identify Auger Tube Sections page 27 Assemble the Main Auger Tube page 30 Install the Boot on the Auger tube...

  • Page 27: Identify Auger Tube Sections

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.2. I DENTIFY UGER ECTIONS 3.2. IDENTIFY AUGER TUBE SECTIONS Note: See Table 3.2 for the number of tube sections and their part numbers and lengths. Assemble the auger starting with the discharge section and working toward the intake section.
  • Page 28 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.2. I X130-74, X130-84, X130-94 DENTIFY UGER ECTIONS INTAKE 159" X1384 LOWER TUBE 147 3/16" 20097 39" 160 1/2" X1384 LOWER MIDDLE TUBE 20099 240" 39" 120" X1384/94 UPPER MIDDLE TUBE 29938 240"...
  • Page 29 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.2. I DENTIFY UGER ECTIONS INTAKE X1394 LOWER TUBE 20101 159" 174 3/8" X1394 LOWER MIDDLE TUBE 20103 39" 216 5/16" 240" 120" 39" X1384/94 UPPER MIDDLE TUBE 29938 120"...

  • Page 30: Assemble The Main Auger Tube

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.3. A X130-74, X130-84, X130-94 SSEMBLE THE UGER 3.3. ASSEMBLE THE MAIN AUGER TUBE See Table 3.3. for a list of hardware required to assemble the main auger tube. Table 3.3. Parts Required, Assembling the Main Auger Tube Part Number Description X130-74 X130-84...

  • Page 31: Install The Boot On The Auger Tube

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.4. I NSTALL THE OOT ON THE UGER TUBE 3.4. INSTALL THE BOOT ON THE AUGER TUBE See Table 3.4. for a list of parts required to install the boot on the auger tube. Table 3.4.
  • Page 32 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.4. I X130-74, X130-84, X130-94 NSTALL THE OOT ON THE UGER TUBE 2. Slip the boot-tube attach plate over the boot flighting. Position the plate with flat edge facing up (see Figure 3.6), and fasten with five 7/16” x 1-1/4” GR8 bolts inserted from the boot side of the flange and 7/16”...

  • Page 33: Install Boot Bearing, Lower Sprocket, And Drive Chain

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.5. I NSTALL EARING OWER PROCKET RIVE HAIN 3.5. INSTALL BOOT BEARING, LOWER SPROCKET, AND DRIVE CHAIN See Table 3.5. for a list of parts required to install the boot bearing, lower sprocket, and drive chain.

  • Page 34: Install The Boot Tow Bar

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.6. I X130-74, X130-84, X130-94 NSTALL THE Note: It is recommended you use a thread locking compound that meets or exceeds Loctite Blue© on all set screws. Important: To prevent premature failure of the lower bearing, ensure it has been assembled in the correct sequence.

  • Page 35: Install The Discharge Spout

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.7. I NSTALL THE ISCHARGE POUT 3.7. INSTALL THE DISCHARGE SPOUT 1. Align the discharge spout over the opening in the upper tube. 2. Attach the discharge spout with two 7/16” x 1-1/4” GR 8 bolts [18698] and 7/16”...

  • Page 36: Apply Logo And Model Decals

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.9. A X130-74, X130-84, X130-94 PPLY OGO AND ODEL ECALS 3.9. APPLY LOGO AND MODEL DECALS 1. Prepare surface by cleaning thoroughly with soap and water. Surface must be clean and free of dirt, grime, rust and oil.

  • Page 37: Auger Tube Truss Assembly

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY 3.10. AUGER TUBE TRUSS ASSEMBLY • X130-74 augers use a double cable truss on the top of the auger tube “X130- 74 Auger Tube Truss Assembly” on page 37). •...
  • Page 38 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.10. A X130-74, X130-84, X130-94 UGER RUSS SSEMBLY 7/16” X 1-1/4” BOLTS TRUSS TOWER HIGH TRUSS TOWER 7/16” LOCKNUTS TRUSS TOWER 7/16” X 1-1/4” BOLTS 7/16” LOCKNUTS TRUSS CABLE ATTACH BRACKET Figure 3.12 X130-74 Truss Towers and Truss Cable Attach Brackets 30787 R2...
  • Page 39 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY X130-74 T NSTALL THE RUSS ABLES There are two cable runs on the X130-74, a long cable run between the upper tube and the lower tube, and a short cable run between the lower tube and the upper middle tube: •...
  • Page 40 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.10. A X130-74, X130-84, X130-94 UGER RUSS SSEMBLY • Attach eyebolts to the ends of the 36’ cable [20090] with two 3/8” cable clamps [18990], using about 10" (25.4 cm) - 12" (30.5 cm) of cable. Tighten securely.
  • Page 41 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY Figure 3.13 X130-74 Truss Cable Installation 30787 R2...

  • Page 42: X130-84/X130-94 Auger Tube Truss Assembly

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.10. A X130-74, X130-84, X130-94 UGER RUSS SSEMBLY 3.10.2. X130-84/X130-94 A UGER RUSS SSEMBLY X130-84/X130-94 T NSTALL RUSS OWERS AND RUSS UBES See Table 3.9. for a list of parts required to install the X130-84/X130-94 truss towers and truss tubes, as well as for figure references that apply to the diagrams below.
  • Page 43 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY Table 3.9. X130-84 and X130-94 Truss Towers and Tubes Parts Reference Fig Ref Part # Part Description 17459WH Low truss tower bracket 17460WH High truss tower bracket 21301WH...
  • Page 44 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.10. A X130-74, X130-84, X130-94 UGER RUSS SSEMBLY Figure 3.14 X130-84 Truss Towers 30787 R2...
  • Page 45 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY Figure 3.15 X130-84 Truss Tubes 30787 R2...
  • Page 46 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.10. A X130-74, X130-84, X130-94 UGER RUSS SSEMBLY Figure 3.16 X130-94 Truss Towers 30787 R2...
  • Page 47 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY Figure 3.17 X130-94 Truss Tubes 30787 R2...
  • Page 48 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.10. A X130-74, X130-84, X130-94 UGER RUSS SSEMBLY X130-84/X130-94 C NSTALL ABLE RUSSING See Table 3.10. for a list of parts required to install the X130-84/X130-94 truss cables, as well as for figure references that apply to the Figure 3.18 (X130-84 shown, X130-94 is similar).
  • Page 49 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.10. A UGER RUSS SSEMBLY Figure 3.18 X130-84, X130-94 Truss Cables 30787 R2...

  • Page 50: Assemble The Auger Frame

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.11. A X130-74, X130-84, X130-94 SSEMBLE THE UGER RAME 3.11. ASSEMBLE THE AUGER FRAME Table 3.11. provides a list of parts required to assemble the auger frame. Table 3.11. Parts Required, Assemble Auger Frame X130-74 X130-84 X130-94...
  • Page 51 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.11. A SSEMBLE THE UGER RAME WARNING Components are heavy and create a crushing and pinching hazard if improperly handled. Be sure to use proper hoisting equipment and procedures, and ensure lifting apparatus is secure.
  • Page 52 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.11. A X130-74, X130-84, X130-94 SSEMBLE THE UGER RAME 3/8” LOCKNUTS 3/8” X 1-1/4” BOLTS 1/2” LOCKNUTS SCISSOR REST 1/2” X 1-1/2” BOLTS 3-PIECE AXLE STABILIZER CROSS MEMBER SCISSOR REST 1/2”...
  • Page 53 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.11. A SSEMBLE THE UGER RAME 7. Elevate the frame arm with a support stand placed under the stabilizer cross member, and place another support stand so it can be used to support the bowtie end of the lower scissor arms as they are installed.
  • Page 54 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.11. A X130-74, X130-84, X130-94 SSEMBLE THE UGER RAME 9. Lift the bowtie into place, and bolt it to the lower scissors with eight 5/8'' x 2'' bolts and 5/8'' locknuts per side. A steel punch may be necessary to align bolt holes.
  • Page 55 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.11. A SSEMBLE THE UGER RAME 11. Install the upper scissor: a. Install the scissor support on the upper scissor using 1/2'' x 1-3/4'' GR8 bolts and 1/2'' locknuts. b.
  • Page 56 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.11. A X130-74, X130-84, X130-94 SSEMBLE THE UGER RAME 12. Use four 1/2 x 1-1/2 bolts and four 1/2” locknuts to loosely install four frame attach spacers on the four upper and lower tube attach brackets (the spacers must be free to move during the tube installation process).

  • Page 57: Installing The Hydraulic Cylinders

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.12. I NSTALLING THE YDRAULIC YLINDERS 3.12. INSTALLING THE HYDRAULIC CYLINDERS 1. Position the cylinders on the cylinder lugs. The rod end of the cylinder must be attached to the bowtie so that the rod extends towards the intake (Figure 3.31).

  • Page 58: Assemble Wheel Hubs And Install Tires

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.13. A X130-74, X130-84, X130-94 SSEMBLE HEEL UBS AND NSTALL IRES 3.13. ASSEMBLE WHEEL HUBS AND INSTALL TIRES For each axle extension (29961WH) and hub assembly (17013) pair: 1. Remove any dirt from spindle and hub. 2.

  • Page 59: Attaching The Auger Tube To The Frame

    - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.14. A TTACHING THE UGER UBE TO THE RAME 3.14. ATTACHING THE AUGER TUBE TO THE FRAME Table 3.12. provides a list of parts required to attach the auger tube to the frame. Table 3.12.
  • Page 60 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.14. A X130-74, X130-84, X130-94 TTACHING THE UGER UBE TO THE RAME 1-3/4” X 19” LOWER FRAME ATTACH PIN 5/16” X 2-1/2” ROLL PIN STABILIZER BRACKETS Figure 3.26 Inserting the Lower Frame Attach Pins 5/8”...
  • Page 61 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.14. A TTACHING THE UGER UBE TO THE RAME 6. Connect tube to the scissor lift: e. Adjust the tube height and frame position until the upper frame attach spacers are aligned with the tube connection flange holes at the top of the upper scissor arm.

  • Page 62: Connecting Hydraulic Hose To Cylinders

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.15. C X130-74, X130-84, X130-94 ONNECTING YDRAULIC OSE TO YLINDERS 3.15. CONNECTING HYDRAULIC HOSE TO CYLINDERS Table 3.13. provides a list of parts required to connect hydraulic hose to the lift cylinders.
  • Page 63 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.15. C ONNECTING YDRAULIC OSE TO YLINDERS X13 Hydraulic Hose Assembly STEEL TEE STEEL ELBOW HOSE, 3/8'' X 2', 2500 PSI Figure 3.29 Hydraulic Fittings on Cylinders 30787 R2...
  • Page 64 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.15. C X130-74, X130-84, X130-94 ONNECTING YDRAULIC OSE TO YLINDERS X13 Hydraulic Hose Assembly (20058/20059/20060) STEEL ELBOW BALL VALVE (28478) (on Boot) STEEL TEE (28480) HOSE, 3/8'' X 2', 2500 PSI (28468) PIONEER COUPLER (To Tractor Hydraulic Supply)
  • Page 65 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.15. C ONNECTING YDRAULIC OSE TO YLINDERS Figure 3.31 Running Hydraulic Hose Through Frame 30787 R2...

  • Page 66: Install Low Profile Intake Hopper

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.16. I X130-74, X130-84, X130-94 NSTALL ROFILE NTAKE OPPER 1/4” X 3/4” BOLTS AND 1/4” LOCKNUTS Figure 3.32 Installing the Ball Valve on the Boot 3.16. INSTALL LOW PROFILE INTAKE HOPPER WARNING Components are heavy and create a crushing hazard if improperly handled.
  • Page 67 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.16. I NSTALL ROFILE NTAKE OPPER Table 3.14. Parts Required, Install Low Profile Intake Hopper Part Number Description Amount 29978 Low profile hopper 21299 Spout head and tube 29977 Transition 20051...
  • Page 68 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.16. I X130-74, X130-84, X130-94 NSTALL ROFILE NTAKE OPPER 7. Attach the 4 solid wheels to the 4 hopper corners with the axle pins and hairpins. There are 3 height settings (Figure 3.35) that can be used according to preference.
  • Page 69 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.16. I NSTALL ROFILE NTAKE OPPER 7/16” X 1-1/4” BOLTS CABLE ATTACH BRACKET AND 7/16” LOCKNUTS INSPECTION HATCH BAR WHEEL, WHEEL PIN, AND AND HAIRCLIPS HAIRCLIP Figure 3.35 Connecting the Wheels, Inspection Hatch Bar, and Hopper Cable Attach Bracket 5/16”...

  • Page 70: Installing The Hopper Lift Arm And Winch

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.17. I X130-74, X130-84, X130-94 NSTALLING THE OPPER RM AND INCH 3.17. INSTALLING THE HOPPER LIFT ARM AND WINCH Table 3.15 provides a list of parts required to install the intake hopper lift arm and winch.
  • Page 71 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.17. I NSTALLING THE OPPER RM AND INCH 7/16 X 1-1/4” BOLTS 7/16” LOCKNUTS Figure 3.37 Installing the Lift Arm WINCH ASSEMBLY HAIRPIN MOUNT PIN BOOT WINCH BRACKET Figure 3.38 Installing the Manual Winch to on the Boot 30787 R2...
  • Page 72 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.17. I X130-74, X130-84, X130-94 NSTALLING THE OPPER RM AND INCH CABLE CLAMP WINCH CABLE Figure 3.39 Connecting the Winch Cable to Spool WINCH CHAIN AND HOOK SAFETY CHAIN AND HOOK Figure 3.40 Transport Position, Safety Chain and Winch Hook 30787 R2...
  • Page 73 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.17. I NSTALLING THE OPPER RM AND INCH  If you want to change the side of intake feed hopper operation: a. Raise auger hitch jack and disconnect from tractor. b.

  • Page 74: Install The Hitch Jack

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.18. I X130-74, X130-84, X130-94 NSTALL THE ITCH 3.18. INSTALL THE HITCH JACK The jack is attached to the auger with a pin at the pivot point. To install: 1. Elevate the auger boot (intake end) approximately 2’ (5.08 cm) with a front- end loader and sling, and install the jack in a vertical position.
  • Page 75 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.19. C PTO D ONNECTING THE RIVELINE TRANSPORT STRAP PTO DRIVELINE TRANSPORT SADDLE 1/2” X 1-1/2” BOLTS 1/2” LOCKNUTS 3/8” ROLL PIN SPROCKET SHIELD SQUARE KEY 5/16” X 3/4” BOLTS AND 5/16”...

  • Page 76: Auger-To-Tractor Hookup

    3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.20. A X130-74, X130-84, X130-94 UGER RACTOR OOKUP 3.20. AUGER-TO-TRACTOR HOOKUP Important: Auger must be correctly connected to the tractor for all operations, including transport, raising, placement, and augering grain. The final stage of the assembly is attaching the auger to the tractor.
  • Page 77 - X-S 13" A 3. A HEATHEART ERIES UGERS SSEMBLY X130-74, X130-84, X130-94 3.20. A UGER RACTOR OOKUP Figure 3.44 Measurements Between Drawbar and PTO Driveline MEASUREMENT PROBLEM SOLUTION • The PTO driveline will bottom out • Pull out or lengthen the trac- If (A) is less than 14”...
  • Page 78 3. A - X-S 13" A SSEMBLY HEATHEART ERIES UGERS 3.20. A X130-74, X130-84, X130-94 UGER RACTOR OOKUP 30787 R2...

  • Page 79: Transport

    - X-S 13" A 4. T HEATHEART ERIES UGERS RANSPORT X130-74, X130-84, X130-94 4.1. T RANSPORT ROCEDURE 4. Transport WARNING Before continuing, ensure you have read and understand the relevant information in the safety section. Safety information is provided to help prevent serious injury, death, or property damage.
  • Page 80 4. T - X-S 13" A RANSPORT HEATHEART ERIES UGERS 4.1. T X130-74, X130-84, X130-94 RANSPORT ROCEDURE JACK LUG AXLE PIN AXLE Figure 4.1 Retract Wheel Axles 3. Position and secure hitch pin and safety chain (See Figure 4.2). Place safety chain through clevis welded to auger hitch tube and bolt together before attaching to tractor.
  • Page 81 - X-S 13" A 4. T HEATHEART ERIES UGERS RANSPORT X130-74, X130-84, X130-94 4.1. T RANSPORT ROCEDURE WINCH CABLE AND HOOK SAFETY CHAIN AND HOOK Figure 4.3 Hopper in Transport Position CAUTION If auger wheels are partially or fully buried in snow or grain, failure to clear the area around the wheels before moving may cause damage to the auger or result in serious injury.
  • Page 82 4. T - X-S 13" A RANSPORT HEATHEART ERIES UGERS 4.1. T X130-74, X130-84, X130-94 RANSPORT ROCEDURE CAUTION Failure to secure the unit prior to transporting could cause a serious hazard to the occupants of the towing vehicle or other vehicles.

  • Page 83: Placement

    - X-S 13" A 5. P HEATHEART ERIES UGERS LACEMENT X130-74, X130-84, X130-94 5.1. P LACEMENT ROCEDURE 5. Placement Important: Wheels must be free to move when raising or lowering the auger. Important: Always use a safety chain when transporting the auger. Note: Do not place anything under the wheels of the auger for added height.
  • Page 84 5. P - X-S 13" A LACEMENT HEATHEART ERIES UGERS 5.1. P X130-74, X130-84, X130-94 LACEMENT ROCEDURE CAUTION Dirt in the hydraulic system can damage the cylinder o- rings, causing leakage and the possible failure of the system and personal injury. 5.
  • Page 85 - X-S 13" A 5. P HEATHEART ERIES UGERS LACEMENT X130-74, X130-84, X130-94 5.1. P LACEMENT ROCEDURE d. Remove the axle pin from the axle and slide the axle outwards until the second set of holes line up (Figure 5.2). Reinsert the axle pin and secure with snap pin.
  • Page 86 5. P - X-S 13" A LACEMENT HEATHEART ERIES UGERS 5.1. P X130-74, X130-84, X130-94 LACEMENT ROCEDURE CAUTION If hose valve remains open, a loss of hydraulic pressure within in the tractor system will allow the auger to lower inadvertently, damaging the equipment and causing personal injury.

  • Page 87: Positioning Tractor For Right-Angle Drive Operation

    - X-S 13" A 5. P HEATHEART ERIES UGERS LACEMENT X130-74, X130-84, X130-94 5.2. P OSITIONING RACTOR FOR IGHT ANGLE RIVE PERATION 5.2. POSITIONING TRACTOR FOR RIGHT-ANGLE DRIVE OPERATION 1. Use the tractor to position the auger at the bin, as described in the previous section, ensuring that the auger wheels are securely chocked, and that the scissor lift valve is closed.
  • Page 88 5. P - X-S 13" A LACEMENT HEATHEART ERIES UGERS 5.2. P X130-74, X130-84, X130-94 OSITIONING RACTOR FOR IGHT ANGLE RIVE PERATION Figure 5.5 Tractor Position for Right Angle PTO Drive (Left Side Drive Con- figuration) 30787 R2...

  • Page 89: Operation

    - X-S 13" A 6. O HEATHEART ERIES UGERS PERATION X130-74, X130-84, X130-94 6.1. P OPERATION HECKLIST 6. Operation WARNING Before continuing, ensure you have read and understand the relevant information in the safety section. Safety information is provided to help prevent serious injury, death, or property damage.

  • Page 90: Operator Controls

    6. O - X-S 13" A PERATION HEATHEART ERIES UGERS 6.2. O X130-74, X130-84, X130-94 PERATOR ONTROLS 6.2. OPERATOR CONTROLS Figure 6.1 shows the hydraulic shut-off valve for the main auger tube hydraulic lift cylinders. Figure 6.2 and Figure 6.3 (respectively) show hydraulic winch and manual winch controls for lifting and lowering the hopper to and from transport position.

  • Page 91: Pto Drive Operation

    - X-S 13" A 6. O HEATHEART ERIES UGERS PERATION X130-74, X130-84, X130-94 6.2. O PERATOR ONTROLS 6.2.1. PTO D RIVE PERATION Correct operation of the auger requires pre-inspection of the drive system, operator knowledge on how to shut down the system, and a general monitoring of the system during operation.

  • Page 92: Operating Procedures

    6. O - X-S 13" A PERATION HEATHEART ERIES UGERS 6.3. O X130-74, X130-84, X130-94 PERATING ROCEDURES 6.3. OPERATING PROCEDURES DANGER Rotating Auger Hazard Contact with rotating flighting will result in amputation or severe laceration. DO NOT operate with guards removed or modified.

  • Page 93: Normal Start

    - X-S 13" A 6. O HEATHEART ERIES UGERS PERATION X130-74, X130-84, X130-94 6.3. O PERATING ROCEDURES 9. Lock out the tractor and conduct a complete inspection of the auger following the checklist on page 91. Important: After the initial start-up and inspection, the auger should be shut down and inspected at least 3 more times during the first 10 hours of operation.

  • Page 94: Normal Shutdown

    6. O - X-S 13" A PERATION HEATHEART ERIES UGERS 6.3. O X130-74, X130-84, X130-94 PERATING ROCEDURES • If grain overflows through safety discharge door, then the auger is loaded beyond its capacity; reduce volume of feed going into intake hopper. Remem- ber, auger capacity will decrease as the auger’s angle increases.

  • Page 95: Emergency Stop / Full-Tube Restart

    - X-S 13" A 6. O HEATHEART ERIES UGERS PERATION X130-74, X130-84, X130-94 6.3. O PERATING ROCEDURES 6.3.4. E MERGENCY ESTART Although it is recommended that the machine be emptied before stopping, in an emergency situation: 1. Stop or shut down the power source immediately. 2.

  • Page 96: Reverser Operation

    6. O - X-S 13" A PERATION HEATHEART ERIES UGERS 6.3. O X130-74, X130-84, X130-94 PERATING ROCEDURES 6.3.5. R EVERSER PERATION The following procedures are a supplement to the instructions that begin in “Operating Procedures” on page 92. Read and understand all instructions before operating auger.
  • Page 97 - X-S 13" A 6. O HEATHEART ERIES UGERS PERATION X130-74, X130-84, X130-94 6.3. O PERATING ROCEDURES Reverse Position Reverse Position Forward Position Forward Position Figure 6.5 Forward and Reverse PTO Positions (1000 RPM PTO Reverser) Before Operating in the Normal Forward Mode: 1.
  • Page 98 6. O - X-S 13" A PERATION HEATHEART ERIES UGERS 6.3. O X130-74, X130-84, X130-94 PERATING ROCEDURES To Operate in the Reverse Mode: 1. Insert the stub spline on the PTO driveline into the Reverse spline coupler (see Figure 6.4 and Figure 6.5), making certain it is securely locked into place.

  • Page 99: Lowering & Completion

    - X-S 13" A 6. O HEATHEART ERIES UGERS PERATION X130-74, X130-84, X130-94 6.3. O PERATING ROCEDURES 6.3.6. L & C OWERING OMPLETION 1. Run the unit to clean out the majority of the grain from the main auger tube, boot, and hopper.
  • Page 100 6. O - X-S 13" A PERATION HEATHEART ERIES UGERS 6.3. O X130-74, X130-84, X130-94 PERATING ROCEDURES 30787 R2...

  • Page 101: Maintenance

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.1. M AINTENANCE NTERVALS 7. Maintenance WARNING Before continuing, ensure you have read and understand the relevant information in the safety section. Safety information is provided to help prevent serious injury, death, or property damage.

  • Page 102: Fluids And Lubricants

    7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.2. F X130-74, X130-84, X130-94 LUIDS AND UBRICANTS 7.2. FLUIDS AND LUBRICANTS Use SAE approved 90W or equivalent gear oil. REASE Use SAE multi-purpose high-temperature grease with extreme pressure (EP) performance or SAE multi-purpose lithium-based grease.

  • Page 103: Hydraulic Hose And Coupler Inspection

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.3. M AINTENANCE ROCEDURES 7.3.2. H YDRAULIC OSE AND OUPLER NSPECTION Using a piece of cardboard or wood, run it along the length of the hose and around all fittings.
  • Page 104 7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.3. M X130-74, X130-84, X130-94 AINTENANCE ROCEDURES Figure 7.1 Auger Grease Fitting Locations 30787 R2...

  • Page 105: Hopper Lift Cable Inspection

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.3. M AINTENANCE ROCEDURES Figure 7.2 PTO Grease Fitting Locations To grease: 1. Use SAE multi-purpose high-temperature grease with extreme pressure (EP) performance or SAE multi-purpose lithium-based grease. 2.

  • Page 106: Swing Tube Coupler Chain Servicing

    7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.3. M X130-74, X130-84, X130-94 AINTENANCE ROCEDURES CABLE PULLEYS Figure 7.3 Cable Pulleys 7.3.6. S WING OUPLER HAIN ERVICING 1. Remove any accumulated debris with a cloth or a soft wire brush. 2.

  • Page 107: Boot And Hopper Chain Drive Servicing

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.3. M AINTENANCE ROCEDURES 7.3.7. B OOT AND OPPER HAIN RIVE ERVICING DANGER Rotating parts hazard: • Fingers, hands, feet, hair, clothing, and accessories can become caught or drawn into the pinch point.

  • Page 108: Gearbox Oil Level

    7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.3. M X130-74, X130-84, X130-94 AINTENANCE ROCEDURES b. For the Hopper: loosen the 2 bolts of the flighting bearing on the side that needs adjustment and set the chain slack (Figure 7.6). Figure 7.6 Hopper Chain Drive Note: If the chain can’t be tightened enough, remove a link from the chain.

  • Page 109: Speed Reducer Gearbox Oil Levels

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.3. M AINTENANCE ROCEDURES 7.3.9. S PEED EDUCER EARBOX EVELS CCESSING EARBOX Remove the hairpin securing the gearbox safety cover, fold up the safety cover, and service gearbox as required. Replace and secure the gearbox safety cover after service is complete.

  • Page 110: Wheel Bolt Tightening

    7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.3. M X130-74, X130-84, X130-94 AINTENANCE ROCEDURES 7.3.13. W HEEL IGHTENING 5. Clean wheel and hub mounting surfaces to ensure there is no rust or debris. 1. Install the wheel and finger-tighten the wheel bolts.

  • Page 111: Cable Adjustment (X130-74)

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.3. M AINTENANCE ROCEDURES 7.3.14. C (X130-74) ABLE DJUSTMENT The cables are properly tightened when: • There is no slack in the cables. • The discharge end is deflected sightly upwards. •...

  • Page 112: Cable Adjustment (X130-84, X130-94)

    7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.3. M X130-74, X130-84, X130-94 AINTENANCE ROCEDURES • Lift the discharge end of the auger with a front end loader or rest on a bin so that the tube has a slight upward deflection at the discharge to give the cable some slack.

  • Page 113: Changing Upper/Lower Gearbox Oil

    - X-S 13" A 7. M HEATHEART ERIES UGERS AINTENANCE X130-74, X130-84, X130-94 7.3. M AINTENANCE ROCEDURES 7.3.16. C HANGING PPER OWER EARBOX 1. Remove the gearbox and place it on a stable and level work bench. 2. Place a pan under the drain plug. 3.
  • Page 114 7. M - X-S 13" A AINTENANCE HEATHEART ERIES UGERS 7.3. M X130-74, X130-84, X130-94 AINTENANCE ROCEDURES 30787 R2...

  • Page 115: Storage

    - X-S 13" A 8. S HEATHEART ERIES UGERS TORAGE X130-74, X130-84, X130-94 8. Storage WARNING Before continuing, ensure you have read and understand the relevant information in the safety section. Safety information is provided to help prevent serious injury, death, or property damage.
  • Page 116 8. S - X-S 13" A TORAGE HEATHEART ERIES UGERS X130-74, X130-84, X130-94 30787 R2...

  • Page 117: Troubleshooting

    - X-S 13" A 9. T HEATHEART ERIES UGERS ROUBLESHOOTING X130-74, X130-84, X130-94 9. Troubleshooting The following table lists the causes and solutions to some potential problems you may encounter in operating your swing-away auger. Table 9.1 PROBLEM CAUSED BY SOLUTION Auger is plugged or obstructed.
  • Page 118 9. T - X-S 13" A ROUBLESHOOTING HEATHEART ERIES UGERS X130-74, X130-84, X130-94 30787 R2...

  • Page 119: Appendix

    - X-S 13" A 10. A HEATHEART ERIES UGERS PPENDIX X130-74, X130-84, X130-94 10.1. S PECIFICATIONS 10.Appendix 10.1. SPECIFICATIONS Important: Wheatheart Manufacturing reserves the right to change specifications without notice. Table 10.1 X130-74 X130-84 X130-94 CAPACITY Unloading Rate 8700 - 9600 Bu/Hr DIMENSIONS 13”...

  • Page 120: Bolt Torque Values

    10. A - X-S 13" A PPENDIX HEATHEART ERIES UGERS 10.2. B X130-74, X130-84, X130-94 ORQUE ALUES 10.2. BOLT TORQUE VALUES Tables 10.2 and 10.3 give correct torque values for various bolts and capscrews. The bolt diameter is measured to the outside of the threads. When tightening all bolts, tighten the nut on the bolt to the torque specified in the tables, unless otherwise specified.
  • Page 121 - X-S 13" A 10. A HEATHEART ERIES UGERS PPENDIX X130-74, X130-84, X130-94 10.2. B ORQUE ALUES Table 10.3 Metric Bolt Torque Bolt Diameter (N·m) (ft·lb) (N·m) (ft·lb) 1050 1495 1103 2100 1550 2600 1917 3675 2710 30787 R2...
  • Page 122 10. A - X-S 13" A PPENDIX HEATHEART ERIES UGERS 10.2. B X130-74, X130-84, X130-94 ORQUE ALUES 30787 R2...

  • Page 123: Warranty Registration

    WARRANTY REGISTRATION Wheatheart congratulates you on your new equipment purchase. The warranty registration form must be filled out within thirty (30) days from delivery date and sent to: Wheatheart Manufacturing Box 39 Rosenort, Manitoba, Canada, R0G 1WO CUSTOMER COPY (Retain this card for warranty and record purposes.) PRODUCT: DEALER’S NAME: SERIAL #:...

  • Page 125: Limited Warranty

    LIMITED WARRANTY Wheatheart warrants to the buyer that the new machinery is free from defects in material and workmanship. This warranty is only effective for any new machinery that has not been altered, changed, repaired, or treated since its delivery to the buyer, other than by Wheatheart or its authorized dealers or employees, and does not apply to accessories, attachments, tools, or parts sold or operated with the new machinery if they have not been manufactured by Wheatheart.
  • Page 126 P.O. Box 39 Rosenort, Manitoba, CANADA R0G 1W0 Phone: (866) 467-7207 (Canada & USA) Fax: (866) 768-4852 Website: www.wheatheart.com Email: sales@wheatheart.com Part of the Ag Growth International group © Ag Growth International Inc. 2015 Printed in Canada...

This manual is also suitable for:

X130-74X130-84X130-94

Table of Contents