Important Notice - Extang TRIFECTA 2.0 Installation Sheet

To prepare the Trifecta 2.0 to
drive in the open position,
release the rear (tailgate)
clamps and fold the
cover forward.
Special Instructions for Alternative Brackets
Front (cab clamp)
Front (cab clamp)
Remove any snow or foreign matter
before folding
Do NOT tow your vehicle from the rear with
any Extang bed cover on your truck
IMPORTANT: Before folding
the second section of the
cover, the rear (tailgate) clamps
must be stowed securely
into the rail.
Add clamp plate
as shown here
IMPORTANT
Re-tighten the front / cab clamps after the first week of driving the vehicle.
Also periodically check the clamps to ensure they are secure.
While driving, the cover must be completely flat and secure with all four clamps
in the closed position or completely folded up (all panels) and secured
at the cab. DO NOT DRIVE with the cover in a partially open position.
Add clamp plate
as shown here

IMPORTANT NOTICE

Fold the cover forward
and fasten BOTH straps
in the middle section
to the front rail.
Rear (tailgate clamp)
Rear (tailgate clamp)