Related Manuals for Setma E09ME22009
Summary of Contents for Setma E09ME22009
- Page 1 Instruction Manual Camera Interface for New Mercedes-BENZ NTG 4.5 4.7 Model Name E09ME22009 Released Date 2019-04-15 Manual Version Language English...
-
Page 2: Table Of Contents
Contents 1.Warning ......................................3 2.Compatibility ....................................5 3.Features......................................6 4.Specifications....................................7 5.Package Components ...................................8 6.Wiring Diagram ....................................9 7.DIP Switch Settings ..................................11 8.Operation Instruction ..................................13 9.DVR Switching .....................................16... -
Page 3: Warning
△ ,!Warning: ! In order to protect the driving safety and avoid break the traffic law; please DO NOT operate the interface while driving. ! The reversing surveillance function just is used in reversing assistance. Please check the entire surroundings while reversing. - Page 4 ! Start the engine before loading, check the interface whether have function displayed, key control whether correct, the vehicle interface whether having a scratch. Please give the feedback to the supplier/manufacturer if there have any questions. ! Please note that put the disassembled automotive components in a good way on the installation process, avoid scratching the instrument panel, the leftovers of connecting cables need to handle and DO NOT leave it in the car.
-
Page 5: Compatibility
2.Compatibility:... -
Page 6: Features
3.Features: A. Support Intelligent Parking Assist System including PDC (Parking Distance Control) and FPG (Flexible Parking Guidelines) B. Support further software update by TF Card C. Support power supply for rear view camera D. Support power supply for DVR device E. -
Page 7: Package Components
B. Power Spec: Input Power: 9V-16V Consumption: 6W C. Package Content: Interface Unit * 1 Main Power Harness * 1 LVDS Cable * 1 5.Package Components Main Unit Dimension: 143*102*26 mm LVDS Cables Quadlock Main Power Cable... -
Page 8: Wiring Diagram
6.Wiring Diagram... - Page 9 Chart A Supply power for DVR or other video devices. Just connect the ACC_OUT (RED) when use aftermarket front view camera ACC_OUT Supply 12V power for backup camera VCC 12V Reverse detect (Connect to 360 reverse detect when install 360, otherwise don’t have to ) 360 Reverse DET Rear View Camera/360 (PAL/NTSC) video input Front View Camera(PAL/NTSC) video input...
-
Page 10: Dip Switch Settings
7.DIP Switch Settings... - Page 11 * Dip Switcher SettingsⅡ（ Quick Setting） :...
-
Page 12: Operation Instruction
8. Operation Instruction ! Note: Please use the protective measures, avoid damaging the original car accessories 1. Please press the red circle position 2. Open the silver button panel 3. Remove the two screws... - Page 13 4. Hold up with both hands,the center stack will appearance. 5. Plug the LVDS cables from the head unit 6.Remove the screws from head unit 7. Connect to the power cables from head unit...
- Page 14 8.Connect to the blue LVDS socket from OEM head unit 9. Plug the blue LVDS cables from OEM head unit, then connect to the LVDS OUT of camera interface box.
-
Page 15: Dvr Switching
9. DVR Switching Please put on (▼) the dip switch No.6, turn on the DVR, then long press 2 seconds to enter DVR by press hang up button on steering wheel.
Need help?
Do you have a question about the E09ME22009 and is the answer not in the manual?
Questions and answers