ANCEL FX3000 Upgrade Manual

Download this manual

ANCEL FX3000 Upgrade Guide

There are 2 methods to upgrade the FX3000 scan tool, method 1(Via TF Card) and method 2( Via

USB Cable). Here's the upgrade guide following for method

2(Via USB

Cable).

Step 1:

Before starting the upgrade, please connect this device to a computer via the USB cable,

and make network connection stable.

(It supports WIN XP, 7, 8, 10 operating systems.)

Step 2:

Link to ANCEL website (Register & Log in).

https://anceltech.com/account/register

Need help?

Do you have a question about the FX3000 and is the answer not in the manual?

Page 1 ANCEL FX3000 Upgrade Guide There are 2 methods to upgrade the FX3000 scan tool, method 1(Via TF Card) and method 2( Via USB Cable). Here's the upgrade guide following for method 2(Via USB Cable). Step 1: Before starting the upgrade, please connect this device to a computer via the USB cable, and make network connection stable.
Page 2 Step 3: Download the update software on a computer. https://anceltech.com/support/download Step 4: Click the software and install the update tool.
Page 3 Step 5: Find this software on your computer and open it.
Page 4 Step 6: Select connection mode “USB” and click “OK” to continue. The "Product Serial Number" will be read automatically, then hit “Device Upgrade”. Step 7: Move to the register page, type your email address and Register Code will be read automatically, then hit “Submit”.
Page 5 Step 8: Choose “Select All” and click “Download” to start downloading.
Page 6 How to check if the FX3000 has installed the latest software? Connect the FX3000 to a computer and open the update tool. If the local version is the same as the latest version, it has installed the latest version of...