Decagon Devices pawkit Operator's Manual page 24

Pawkit User Manual
4. Operation
the instrument throughout the measurement. If it is
already on, proceed to the next step.
3. Press button I to begin the water activity measurement.
The LCD display will be reset to 0.00
NOTE: Pressing button I any time during a measure-
ment will restart the water activity measurement.
4. Once the measurement process has been started, the
Pawkit will begin to display water activity measurements
as well as temperature after 5 seconds, and update the
display every second. During this time you will be able
to see that it is measuring by looking at the "sunburst"
icon to the right of the water activity value. As it mea-
sures, you will see the "beams" of the sunburst move
from left to right.
a
20
.
w