Sample Placement - Decagon Devices pawkit Operator's Manual

•
If a sample will be read at some other time, put the
sample cup's disposable lid on the cup to restrict
water transfer. To seal the lid, place tape or Parafilm
completely around the cup/lid junction. It is necessary
to seal the cup if it will be a long time before the mea-
surement is made.

Sample Placement

1. Open the Pawkit by holding the case near the LCD with
one hand and pulling down on the plastic sensor cover
tab with the other hand. 
The sensor cover will rotate and snap into the open posi-
tion as shown in the illustration below.
Pawkit User Manual
17
4. Operation