Taking Measurements - Decagon Devices pawkit Operator's Manual

3. Once the Pawkit is properly positioned over the sample
cup, you are now ready to take readings (see next section
titled "Taking Measurements").
4. To close the instrument, reverse the opening procedure.
With one hand holding the case near the LCD pull
down on the plastic sensor cover tab with the other hand
and rotate until it snaps into the closed position cover-
ing the sensors.

Taking Measurements

1. Make sure the sample cup is positioned as described in
the previous section.
2. Press the left button (I) to turn on the instrument. It
will display the last reading taken. This allows you to
begin a measurement and leave without having to attend
Pawkit User Manual
19
4. Operation