Related Manuals for Marshall Amplification CV730-ND3
Summary of Contents for Marshall Amplification CV730-ND3
- Page 1 B r o a d c a s t A / V D i v i s i o n CV730-ND3/ND3W 30x UHD60 NDI|HX3 PTZ Camera User Manual...
-
Page 2: Table Of Contents
CV730-ND3/ND3W Table of Contents Chapter 1: Package Contents PTZ Camera Installation Instructions Remote Control Chapter 1 Package Contents ........................3 Chapter 2 Function Introduction ......................4 Product Page: I/O functions Introduction ....................4 https://support@marshall-usa. Tally Lamp Function Description ..................6 com/cameras/CV730-ND3/ Description of LED indicator ....................6 Chapter 3 Instruction for installation.....................7... -
Page 3: Chapter 2 Function Introduction
CV730-ND3/ND3W 2.1.2 Back View Chapter 2: Function Introduction I/O Functions Introduction 2.1.1 Front View Item Function Descriptions RS-232 output port, at most 7 cameras can be connected in a RS-232 output serial connection RS-232 input port, at most 7 cameras can be connected in a... -
Page 4: Tally Lamp Function Description
2.2 Tally Lamp Function Description The Tally light function may be enabled through the RS232 command. Please refer to CV730-ND3/ND3W RS-232 command set document 2.3 Description of LED indicator Status Power... -
Page 5: Preparation Before Installation
CV730-ND3/ND3W 3.3.2 I would like to install the camera on the ceiling 3.2 Preparation before installation 3.3.2.1 Prepare for the parts and equipment required during the installation Installation and connection of HD camera requires special skills. To install by yourself, please follow necessary steps, ensure steady and tight installation of the device, and pay attention •... - Page 6 CV730-ND3/ND3W 3.3.2.3 Precautions for installation 1. Before installation, please confirm the orientation of the machine relative to the object to be captured Metal plate B Metal plate B 2. It is recommended that the machine should be set at a distance of more than 2 meter...
-
Page 7: Connecting Devices
CV730-ND3/ND3W 3.4 Connecting devices 3.4.1 RS-232 Connection With RS-232 in/ out, at most 7 Marshall cameras can be connected. Black screw 2. Fix the metal plate A on the machine base with 4 M3 silver screws 3. Lock the metal plate B on ceiling mounted hanger <Note>... - Page 8 CV730-ND3/ND3W 3.4.2 RS-422 Connection • NRS-422 connection instructions With RS-422, at most 7 Marshall cameras can be connected. 1. Hold the two sides of RS-422 connector and pull out in the direction shown by the arrow <Note> When RS-422 connection is being used, do not use RS-232 connection.
-
Page 9: Chapter 4 Remote Control And Setting Menu
CV730-ND3/ND3W 4.2 Settings Menu (following page) Chapter 4: Remote Control and Setting Menu <Remark> Press [MENU] on the remote control to enter the setting menu; the bold underlined values in the following table are defaults. 4.1 Functions of remote control... - Page 10 CV730-ND3/ND3W www.marshall-usa.com www.marshall-usa.com...
-
Page 11: Chapter 5 Network Function Settings Description
CV730-ND3/ND3W Chapter 5: Network Function Settings Description 5.1.1 Connecting to Internet Two common connection methods are shown below: 1. Connecting via IP network switch or router Network Cable Network Cable Computer Camera Switch or Router 2. To connect directly through network cable, the IP address of the computer should be changed so that it is on the same network segment as the camera E.g.: The factory-... -
Page 12: Web Page Function Description
CV730-ND3/ND3W 5.1.4 Using NDI Studio Monitor to View the Images Marshall Network Camera <Remark> Supported when NDI|HX function is on • Account: admin (Default) (Please refer to 5.2.5 Setting - Video - NDI|HX) For the NDI|HX operation, please download the latest NDI software from •... - Page 13 CV730-ND3/ND3W 5.2.2 Viewing In Real Time 5.2.3 Account Management <Remark> Preview pane is not supported when NDI is on Item Function Descriptions Add user account Enter a user name and password to add a new user Set the new account management permissions...
- Page 14 CV730-ND3/ND3W 5.2.4 Setting - System Setting 5.2.5 Setting - Video <Remark> Preview pane is not supported when NDI is on <Remark> Preview pane is not supported when NDI is on Item Function Descriptions Modify thec ameran ame Modify the camera name •...
- Page 15 CV730-ND3/ND3W 5.2.6 Setting - Camera The name can contain commas (,) to distinguish different groups <Remark> Preview pane is not supported when NDI is on Example: default, 123, abc means this machine belongs to three groups at the same time (default/ 123/ abc) Set NDI HX 2/ HX3/ Off •...
- Page 16 CV730-ND3/ND3W • <Remark> First default position = Preset 0 • Motionless Preset: When the function is enabled, the screen will Freeze when Preset is executed. Freeze will be released after Preset is completed • D-Zoom Limit: Set the D-Zoom Limit, x1 - x12 •...
- Page 17 CV730-ND3/ND3W 5.2.7 Setting - Picture 5.2.8 Setting - Audio <Remark> Preview pane is not supported when NDI is on Item Function Descriptions PictureE ffect Picture Effect Set picture effect ,Off/ Neg/ Blac kand White Set picture effect, Off/Neg/Black and White...
- Page 18 CV730-ND3/ND3W 5.2.9 Setting - Network Set MPEG-TS format <Remark> The port setting range 1025 ~ 65535 MPEG-TS Setting <Remark> The following port is used by the camera. Setting of the port may not connect correctly 1935, 8080, 8554, 8556, 8557, 9090 1.
- Page 19 CV730-ND3/ND3W 5.2.11 Setting - Maintenance - Upgrading Firmware 5.2.13 Setting - Maintenance - System Service Item Function Descriptions Select the reset button to resume the factory default setting as the web page Item Function Descriptions Factory Reset setting • Click the link to check the latest firmware version.
-
Page 20: Chapter 6 Dip Switch Setting
CV730-ND3/ND3W Chapter 6: DIP Switch Setting 5.2.15 About 6.1 DIP SWITCH 6.1.1 OUTPUT Switch (Switch to different output resolutions) To switch via the OSD/ RS-232 Command is also available based on the last executed action Output Frame Rate Resolution 59.94 3840x2160p 29.97... -
Page 21: Chapter 7 Troubleshooting
Chapter 8: DIP Safety Instructions Always follow these safety instructions when setting up and using the product: This chapter describes problems you may encounter while using CV730-ND3/ND3W. If you have Operation questions, please refer to related chapters and follow all the suggested solutions. If the problem still Please use the product in the recommended operating environment, away from water or source of heat 1.2 Do not place the product on a tilted or unstable trolley, stand or table. -
Page 22: Copyright Information
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Manufacturer: Marshall Electronics, Inc. Product Name: CV730-ND3/NDW Model Number: PTZ Camera Responsible Party – U.S. Contact Information Supplier: Marshall Electronics, Inc. 20608 Madrona Ave, Torrance, CA. 90503 e-mail: support@marshall-usa.com FCC Compliance Statement This device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the CV730-ND3 and is the answer not in the manual?
Questions and answers