CV420e User Manual CHAPTER 2: FUNCTION INTRODUCTION CHAPTER 3: INSTRUCTIONS FOR INSTALLATION 2.1 I/O Functions Introduction 3.1 Basic Devices 3.1.1 CV420e size Front View Back View Length x Width x Height: 122.06 x 70 x 51 mm Weight: 0.35 Kg...
CV420e User Manual CHAPTER 4: SYSTEM DIAGRAM CHAPTER 5: REMOTE CONTROL & SETTING MENU 5.1 Functions of Remote Control *IR remote included in this package Power Supply AV over IP switch Item Description Move the lens v w r s...
CV420e User Manual 5.2 Setting Menu Press [Menu] on the remote control to enter the setting menu; the bold underlined values in the following table are defaults. www.marshall-usa.com...
CV420e User Manual CHAPTER 6: NETWORK FUNCTION SETTING DESCRIPTION 6.1 Web System Requirements 6.2 Connecting Camera to Network Two common connection methods are shown below 1. Connecting via switch or router AV over IP switch 2. To connect directly through network cable, the IP address of the computer should be changed so that it is on the same network segment as the camera E.g.: The factory-preset default IP address of the camera is 192.168.100.100.
CV420e User Manual CHAPTER 8: SAFETY INSTRUCTIONS www.marshall-usa.com...
Page 16
Warranty Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty.
Need help?
Do you have a question about the CV420e and is the answer not in the manual?
Questions and answers