Operation - Reloop MIXTOUR PRO Operation Manual

DJAY PRO INSTALLATION & CONNECTION
DJAY PRO IPAD/IPHONE INSTALLATION
- Scan the QR code or search for the djay Pro app in the App Store and download it.
- Connect your playback device to the Mixtour Pro's USB-C connection port (27) and your
power supply to the Reloop Mixtour Pro's USB-C power port (28).
- Open the previously downloaded djay Pro app.
Your Mixtour Pro will be automatically detected and is ready to use.
DJAY PRO WINDOWS INSTALLATION
- Search for the djay Pro app in the Microsoft Store and download it.
- Connect your computer to the Mixtour Pro's USB-C connection port (27).
- Open the previously downloaded djay Pro app.
Your Mixtour Pro will be automatically detected and is ready to use.
An additional ASIO driver for low latency is available at www.reloop.com/downloadfinder.
This driver is optional and not required for operation.
DJAY ANDROID INSTALLATION
If you want to use an Android device with the Reloop Mixtour Pro, please first check our FAQ at
www.reloop.com/faqs/. Download the djay app from the Google Play Store and connect as described above.

OPERATION

The Mixtour Pro offers advanced mapping functions. For an overview of these functions, please follow this link:
www.reloop.com/reloop-mixtour-pro-mapping
1. MASTER VOLUME
The Master Volume control (1) adjusts the master output volume.
2. CHANNEL GAIN
The Channel Gain (2) adjusts the channel's output volume.
3. BROWSE ENCODER
Use the Browse Encoder (3) to navigate through your music libraries. Press the Browse Encoder to confirm your selection.
Press Shift (20) + Browse Encoder to go back one step in the menu. Turning the Browse Encoder while holding Mode (6)
allows you to browse the track currently playing.
4. TRACK LOAD BUTTONS
Press the Track Load Button (4) to assign a track to the desired deck. Hold Mode (6) and press the Track Load Buttons
to switch to decks 3 and 4. Hold Shift + press the left Track Load Button to move left through the My Collection libraries
section and the right Track Load Button to move right.
5. SPLIT BUTTON
Splits the eight performance pads. The four left pads control the left channel, and the four right pads control the right channel.
6. MODE BUTTONS
Pressing the Mode Buttons (6) activates the performance mode selector. You can now select the desired performance
mode by pressing the corresponding pad. Pressing Mode + a selected button activates the second-layer functions as
shown on the device label.
7. PERFORMANCE SECTION
The Performance Pads (7) are colour-coded drum pads that trigger the selected performance mode. The different
performance modes can be activated by holding down the Mode Button (6) and simultaneously pressing the selected
performance pad mode. The following performance modes are available:
- Hot Cue Mode
This triggers the eight available cue points, and the pads light up in the corresponding colours. Pressing Shift (20) and
the corresponding cue pad deletes the selected cue point.
- Auto Loop Mode
Each of the eight performance pads has a different loop length. Pressing Auto Loop Mode will activate it immediately
based on the length. Pressing it again will deactivate Auto Loop.
- Bounce Loop
Press one of the eight pads to loop a track. The length of the loop varies from pad to pad.
- Sampler
Triggers the corresponding sample in the sample bank using the drum pads.
- Pitch Cue
Set the musical key for the track by pressing the pads. Hold Shift and press the pads to switch between different cue points.
- Saved Loops
A bank of up to eight hot loops per track for instant recall. These hot loops act like saved cue points. Hold Shift and
press the desired pad to trigger the saved loops instantly.
- Instant FX
The drum pads have a variety of instant effects that are activated by pressing the corresponding pad.
- Neural Mix™
Use the pads to control the various Neural Mix™ elements.
5