Reloop MIXTOUR PRO Operation Manual page 6

8. EQUALIZER (3-BAND/NEURAL MIX™ EQ)
Control the channel's highs, mids and lows or the different Neural Mix™ Elements (Vocals, Harmonic, Drums).
9. NEURAL MIX™ BUTTONS
Switch between the Neural Mix™ equalizer or standard equalizer.
10. FILTER
The filter is off at the 12 o'clock position. Turning the filter clockwise creates a high-pass effect, and turning it anti-
clockwise creates a low-pass effect.
11. FX PADDLES
Use the FX Paddles (12) to activate the previously selected effect. The effect is switched off in the centre position. If you
lock the paddle in the forward position, the effect will remain on until you return the paddle to the centre position. If you
only want to use the effect temporarily, you can retract the paddle for the desired effect duration. Then, when you release
the FX Paddle, it will automatically return to the centre position.
12. FX DRY/WET CONTROL
The FX Control (13) allows you to adjust the FX intensity (dry/wet) of the selected effect. The effect is off in the dry
position. As you turn the FX Control clockwise towards the wet position, the intensity of the effect increases. The Dry/
Wet control affects both decks.
13. FX PARAMETER BUTTONS (FX SELECT)
The Parameter Buttons (14) allow you to control the parameter functions depending on the active mode (e.g. FX
parameter adjustment). You can select the desired effect by pressing Mode (6) + the FX Parameter Buttons. The FX
Parameter Buttons affect both decks.
14. HEADPHONE CUE BUTTONS
The Headphone Cue Buttons (15) allow you to monitor the audio signal of each channel. Pressing the left Headphone Cue
Button while holding down Shift (20) activates Crossfader FX. Pressing the right Headphone Cue Button while holding
down the Shift key activates tempo blend for the Crossfader FX.
15. LOOP IN-OUT-EX BUTTONS
Pressing the Loop In-Out-Ex Button (16) once sets the start point of a loop. Pressing it again sets the end point of the
loop. Press a third time to exit the loop. Press Shift (20) + In-Out-Ex to set an Auto Loop.
16. SYNC BUTTONS
Press Sync (17) to automatically adjust the BPM of one track to the other deck. Press Sync again to deactivate the Sync
function. Press Shift (20) + Sync to match the musical key of the track currently playing.
17. CUE BUTTONS
Use the Cue Buttons (18) to create and trigger a temporary cue point. Pressing the cue button during playback will stop
playback and automatically jump back to the set cue point. If you pause playback and then press the Cue button, a new
cue point is created at that track position. Hold Mode (6) and press the Cue Button to set the musical key of the track
downwards. Hold Shift (20) and press the Cue Button to bend a pitch downwards.
18. PLAY/PAUSE BUTTONS
The Play/Pause Button (19) starts/pauses playback of the selected deck. Hold Mode (6) and press the Play/Pause Button
to set the musical key of the track upwards. Hold Shift (20) and press the Play/Pause Button to bend a pitch upwards.
19. SHIFT BUTTON
Pressing Shift (20) + a selected button activates the corresponding second-layer functions as shown on the device label.
20. LINE FADERS
The Line Faders (21) are used to adjust the output volume of the channels.
21. CROSSFADER
The Crossfader (22) switches between the left and right channels.
22. HEADPHONE CUE VOLUME
Use the Headphone Cue Volume control (23) to adjust the volume of your headphone signal.
23. HEADPHONE CUE MIX
The Headphones Cue Mix control (24) mixes the volume balance between the channel and the master signal via the
headphones.
24. MONO/STEREO SWITCH
The Mono/Stereo Switch (25) selects between stereo or mono output of the master out signal.
6