Shopping List - 3D LabPrint Douglas DC-3 / C-47 Dakota User Manual

Shopping list

Printing material:
RC:
Motor:
Propeller:
ESC:
Battery:
Servos:
Glue:
Retractable gear:
Other:
... print your plane | www.3DLabPrint.com
Polylight LW-PLA
a few of PLA or PETg (elevator arm, motor mount, landing gear, ...)
R/C system, 9-10 or more chanels
2830/1000KV, opt1,
three blade 8 x 6 CCW & CW
any 20A / 4s, opt1, opt2 or similar
2700mAh/ 4s
+ connectors XT60
6x Corona CS238MG or any similar sized servos
13 x 30 x 30 mm / 0.51 x 1.18 x 1.18 inches
1x HXT900 or any similar sized servo for towing hook
23x12x26 mm / 0.82x0.47x0.86 inches
Servo cable extension
Snap knife, Z pliers
CA Glue - medium
40g Retractable Landing Gear with metal shaft with JR Plug
for RC Fixed-wing airplane DIY parts
2x 1mm or 0.8 mm pushrod wire
8x M3x4mm screws + washers (motor)
1x 10x1x696 mm carbon tube
4x 67mm of 3 mm carbon rod
1x 46mm of 3 mm carbon rod
2x M3x50mm for axle
4x M3x30mm for side fix
4x M3x14mm
4x M3x10mm
8x 3,2x15mm screws
Small piece of 1.2 mm steel wire for tail drag wheel axle
8x Self-tapping screw 3x10mm
2x M5 screw and nut, nylon (wing)
page
opt2 or similar
or Gold Conn
+ Activator for CA Glue
(ALIEXPRESS)
24