3D LabPrint Douglas DC-3 / C-47 Dakota User Manual page 21

7. Motor & ESC & battery holder
Fix the battery by velcro tape and mount it in the front of the
fuselage, find the perfect balance and CG position by moving it.
Mount the motor using 4x M3 screws and nuts to the printed
universal motor holder 16 x 19mm. For long motors you can flip the
holder to the front. Glue universal motor mount with motor into the
fuselage in right position.
See video guide motor setup
you will need:
8x M3 x 12mm screws + washers
Power towing setup (2x 480W)
Motor: 2x Flash Hobby D4215 RC / 650KV
(weight: 83g)
or similar
ESC: 2x CC Talon 25A/6s or similar
Propeller: three blade GWS 9 x 5
(cutted to 8 inch) CW & CCW
Battery: 2700mAh / 6s
printed PET mount 16 x 19 mm
LW plane setup (2x 230W)
Motor: any 2830 / 1000KV, opt1,
ESC: any 20A/3-4s, opt1, opt2 or similar
Propeller: three blade 8 x 6 CW & CCW
Battery: 3000mAh / 4s
Batt. connector: XT60
printed PET mount 16 x 19 mm
... print your plane | www.3DLabPrint.com
opt2
or Gold Conn
page
or similar
21