3D LabPrint Douglas DC-3 / C-47 Dakota User Manual page 10

... print your plane | www.3DLabPrint.com
option B Prusa Slicer 3mf files (recommended)
Please follow the guide in the Help section of our website about Prusa Slicer setup.
Drag and drop the 3mf file to the Prusa Slicer window and open it as a Project. It will create
a Generic 3DLabPrint printer, printing profile and materials. Please use these as a starting
point instead of your printer profiles provided by your printer manufacturer. Strong thin-
wall printing is a different discipline than printing Benchys what are the stock profiles usu-
ally optimized for. Once you tweak your profiles (retractions, etc.) you can easily switch the
profile everytime you open the 3mf file. All the slicing tweaks, such as added top/bottom
layers etc. are stored in the models below, so it won't be overwritten.
Remember: We are using 0.5 multiplier and 0 retraction with LW-PLA.
3MF
This method is also suitable for other common brands of printers, such as Creality (Enders),
BambuLab and other. Prusa Slicer provides all the features we need and the settings are
preconfigured in the 3mf files. Use the Print Settings and Filament profiles from our 3mf
files and your Printer profile to ensure the compatibility.
Note: Simplify3D factory files are no longer provided as 3mf files are full substitute for them.
10
page