P0 6 Setback - EPH Controls RFRB V2 Installation And Operation Manual

P0 6 – Setback Mode
In Setback mode, the thermostat reduces the temperature setpoint
by 0°...10°C which is predetermined by the user. The factory default
setting is set to (0°C / OFF) and needs to be activated to function.
Setback mode will only work when the zone is timed o . This can only
happen when the zone is in the AUTO OFF or ALL DAY OFF mode.
To access this setting, press and hold
seconds.
'P01 & Nor' will appear on the screen.
Rotate clockwise until 'P06 & Sb' appears on the screen.
Press to select.
Setback temperature will begin ashing on the screen.
Rotate to set the Setback temperature between 0°...10°C.
Press to con rm.
The setback temperature will be saved and the user will be returned
to the previous screen.
When in Setback mode 'SB' will appear on the screen.
(0.0°C / O )
EPH Controls Ltd.
and together for 5
25