P0 3 Hysteresis - EPH Controls RFRB V2 Installation And Operation Manual

P0 3 Hysteresis

This function allows the installer to change the hysteresis of the
thermostat when the temperature is rising and falling.
If HOn is set to 0.4˚C, this will allow a temperature drop of 0.4˚C
below the target temperature, before the thermostat turns on again.
If HOFF is set to 0.0˚C, this will allow the temperature to rise 0˚C
above the target temperature before the thermostat turns o .
To access this setting press and hold
seconds.
'P01' will appear on the screen. Rotate
HOn' appears on the screen. Press
'HOn' will remain on the screen & the temperature will begin to ash.
Use to select the 'HOn' temperature, press
'HOFF' appears on the screen & the temperature will begin to ash.
Use to select the 'HOFF' temperature, press
The settings will be saved and the user will be returned to the
previous screen. Press
HOn 0.4°C HOFF 0.0°C
to select.
to return to normal operation.
EPH Controls Ltd.
& together for 5
clockwise until 'P03 &
to con rm.
to con rm.
23