To Connect A Rfrb To A Ufh10-Rf - EPH Controls RFRB V2 Installation And Operation Manual

To connect a RFRB
1. On the UFH10-RF:
Press MENU
, 'RF CONNECT' will appear solid on the screen.
Press
Rotate to choose the zone you would like to connect to.
Press to con rm. The zone will stop ashing and appear solid.
2. On the RFRB
Remove the back cover & press the RF button
When 'r01' appears, press the
connected.
3. On the UFH10-RF:
Rotate to choose another zone you would like to connect to or
press
MENU
Note: When pairing additional zones to a UFH10-RF, 'r02' , 'r03', 'r04'
...'r10' can appear on the thermostat screen.
14
V2
, 'P01 rF COn' will appear on the screen.
:
V2
to return to the menu.
to a UFH10-RF
to con rm the thermostat is
RFRB
V2
on the PCB.