Table of Contents
Advertisement
Delay start can be reactivated by:
1.
Lower the target below the current temperature.
2.
Press
to set the temperature.
3.
Increase the target above the zone temperature within 6° .
4.
Press
to con rm.
The heating will be delayed as per the graph on page 18.
If the di erence between the actual temperature and the target is
1°C the thermostat will delay starting for circa 40 minutes.
If the di erence between the actual temperature and the target is
3°C the thermostat will delay starting for circa 24 minutes.
If the di erence is 6°C or more then the thermostat will be switched
on immediately.
The time delay will change if the temperature drops from the
original calculation.
EPH Controls Ltd.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the RFRB V2 and is the answer not in the manual?
Questions and answers