Scanning; Before You Begin Scanning; Changing The Scan Settings For Scanning From The Control Panel - Kodak HERO 4.2 Extended User Manual

Hide thumbs Also See for HERO 4.2:
Table of Contents

Advertisement

8

Scanning

Before you begin scanning

Changing the scan settings for scanning from the control panel

Scanning digitizes documents and pictures, and sends the digital files to your
computer, memory card, email, network folder, or USB flash drive.
To scan to a computer, the Home Center Software must be installed on that
computer, unless you are using the Online Printer Management Tool. (See
from the Online Printer Management Tool, page
When you scan, the digital file can:
• open in Home Center Software (when Home Center Software is loaded and the
printer is connected to a computer with WINDOWS OS).
• open in a third-party scanner software.
• be saved in a format and location that you determine (see
settings for scanning from the control panel, page
Scanning from a software program on the computer (such as Home Center
Software) gives you more options, but you can also scan from the printer control
panel.
If you are scanning to a computer, make sure that the printer is connected to a
computer using a USB cable or wireless network (see
page
9).
If you want to scan to an email address or to a shared network folder, you need to:
• make sure the printer is connected to a computer using a wireless or Ethernet
connection.
• set up a profile using the Online Printer Management Tool (see
To Email, page 27
If you want to adjust settings that the printer uses, do so before you scan from the
printer control panel.
NOTE: These settings do not apply to Scan to Email or Scan to Network Folder. To
change scan settings for scanning to email or to network folder, see
options for scan to email, page 31
network folder, page
1. Open Home Center Software, then select Printer Tools (WINDOWS OS) or
Tools (MAC OS) window.
NOTE: To get to Printer Tools without Home Center Software (WINDOWS OS
only), select Start > All Programs > Kodak > KODAK AiO Printer Tools .
2. Under the Tools heading, select Printer Scan Settings .
www.kodak.com/go/aiosupport
and
Setting up Scan To Network Folder, page
or
36.
85.)
Changing the scan
73).
Networking Your Printer,
Setting scan settings for scan to
Scanning
Setting up Scan
33).
Setting
73

Advertisement

Table of Contents
loading

Table of Contents