1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Grinder
  5. 3260
  6. Manual

Ronix 3260 Manual

Angle grinder 230mm
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ANGLE GRINDER 230mm
3260

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3260 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ronix 3260

Summary of Contents for Ronix 3260

  • Page 1 ANGLE GRINDER 230mm 3260...

  • Page 3: Technical Specifications

    Weight 4.33Kg No-load RPM 6600RPM Wheel Diameter 230mm Supplied in Ronix color box Auxiliary anti-shock Ronix-design Includes handle, Ronix wheel guard, Spanner, 1 pair of carbon brush PART LIST Motor spindle lock switch Main handle housing button Gearbox Side handle...

  • Page 4: Work Area Safety

    WORK AREA SAFETY - Keep work area clean and well lit. Cluttered or dark areas invite accidents. - Don’t operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
  • Page 5 operating a power tool. Don’t use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. -Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

  • Page 6: Safety Warnings Specific For Grinding Operations

    or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. - Store idle power tools out of the reach of children and don’t allow persons unfamiliar with power tool or these instructions to operate the power tool.
  • Page 7 and shock the operator. - When using depressed center grinding wheels, be sure to use only fiberglass-reinforced wheels. - Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses. - Check the wheel carefully for cracks or damage before operation. Replace cracked or damaged wheel immediately.

  • Page 8: Preparation For Use

    gloves and shop aprons to protect skin from contact with hot grindings. - Use of this tool to grind or sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection. WARNING! MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

  • Page 9: Installing The Side Handle

    INSTALLING THE SIDE HANDLE WARNING! TO PREVENT SERIOUS INJURY: Do not used the tool with one handle only or without side handle properly installed 1) the side handle may be installed on either side of gear case. 2) screw the threaded end of the side handle into the selected position. Tighten securely before working.

  • Page 10: Switching On/Off

    SWITCHING ON/OFF 1)Plug the cord set into power socket. 2)To start the tool by pressing the safety lock button firstly,then pressing the trigger. 3)If you press the lock-on button while the trigger is pressed, the trigger is kept in the operating position for continuous operation 4) release the trigger and turn the tool off.

  • Page 11: Cutting Operation

    Regularly clean the tool’s air vents or whenever the vents start to become obstructed. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by RONIX SERVICE Authorized or RONIX Service Centers. USER MANUAL...

Table of Contents