Introduction; Intended Use - Parkside PWM B2 Operation And Safety Notes

ANEMOMETER
˜ Introduction
Congratulations on the purchase of your new anemometer, hereafter referred
to only as "the product".
You have chosen a high-quality product. The user manual forms an integral
part of this product. It contains important information on operation, safety,
use and disposal. Prior to use of the product, familiarise yourself with the
product and all operation and safety notes. For this purpose, carefully read the
following operation instructions and safety notes.
Only use the product as described and for the applications stated. Keep
this manual in a safe place. If you hand the product on to third parties, all
documentation must be passed on as well.
34 GB/IE
˜ Intended use
This product is suitable for measuring wind speed and air temperature. The
wind speed can be displayed in 5 different units (m/s, km/h, ft/min, knots,
mph). The temperature can be displayed in °C or °F. The readings are
displayed on an LCD screen. The LCD screen features a backlight, which can
be switched on and off.
The product features the following functions:
Display of maximum, 2/3 of maximum, minimum or average readings
Automatic power-off function
Hold function (freeze values on the display)
The product can only be used in a dry and dust-free environment. The product
is only intended for use in private households, and not intended for commercial
use.
The manufacturer accepts no liability for damages caused by improper use.