Icom IC-W2A Instruction Manual page 6

ol
1 BASIC OPERATION
Turn power ON
Push and hold the
[POWER] key for 1 sec.
to turn power ON.
¢ A beep sounds at power ON.
1) Set the VHF audio level:
- Rotate the VHF [SQL]
max. counterclockwise.
- Set VHF [VOL] to the
desired level.
- Set VHF [SQL] to mute au-
dio noise while no signal is
being received.
2) Set the UHF audio level:
- Rotate UHF [SQL] max. counterclockwise.
- Set UHF [VOL] to the desired level.
- Set UHF [SQL] to mute audio noise while no signal is being
received.
Set the frequency
e Using the main dial
1) To set the VHF frequency, push [V MAIN] then rotate the
main dial.
2) To set the UHF frequency, push [U MAIN] then rotate the
main dial.
e Using the keyboard
Push [@ ENT], then push 4 digit keys.
¢ Others
Advanced frequency setting methods are possible via the
keyboard, main dial, etc. See pgs. 15~17 for details.